Multi-Objective Optimization of Diesel–Ethanol–n-Butanol Ternary Blends: Balancing Performance and Emissions in CI Engines
Year: 2026
Type: article
Abstract: This study evaluates the performance and emissions of a diesel engine fueled with diesel/ethanol/n-butanol blends and identifies optimal operating conditions using multi-objective optimization. Response Surface Methodology based on a Central Composite Design was applied to model the interactions between ethanol (0–10% v/v), n-butanol (0–12% v/v), and engine speed (2800–3300 rpm). Analysis of variance (ANOVA) indicated that the developed regression models for the eight evaluated responses (power, torque, volumetric fuel consumption, brake-specific fuel consumption, NOx, UHC, CO, and CO2) were statistically significant within the 95% to 99% confidence levels (p < 0.05 to p < 0.0001). While ethanol’s latent heat of vaporization suppressed thermal NOx formation by cooling the in-cylinder charge, it simultaneously increased the risk of localized flame quenching and unburned emissions. To mitigate this thermal conflict, n-butanol was incorporated as a phase stabilizer and a thermal buffer. Furthermore, the wide boiling point disparity among the ternary constituents is discussed as a plausible thermodynamic basis for secondary micro-explosion, potentially facilitating droplet breakup despite the lower heating values of the alcohols. Utilizing Derringer’s desirability function within the tested factor ranges, a model-predicted optimal operating condition was identified at 9.52% ethanol and 2.98% n-butanol at 2883.33 rpm. At this model-predicted state, the regression models estimate a brake torque of 17.450 N·m, a brake power of 5.288 kW (aligning within 0.36% with the kinematic value of 5.269 kW via Pb = 2 π N τ/60000), and an analytically derived BSFC of 303.14 g/kWh, alongside predicted exhaust concentrations of 248.58 ppm for NOx, 14.95 ppm for UHC, 0.745% for CO, and 3.47% for CO2. Because this optimum is derived statistically from the fitted response surfaces without an independent confirmation experiment, these values represent model-based predictions subject to polynomial extrapolation and blend-density measurement uncertainties.
Source: Fuels
DOI: 10.3390/fuels7040087
Authors: Ali Allahyari(Conceptualization, Data curation, Formal analysis, Investigation, Resources, Software, Validation, Writing – original draft), Behdad Shadidi(Conceptualization, Data curation, Formal analysis, Funding acquisition, Investigation, Methodology, Project administration, Resources, Software, Supervision, Validation, Visualization, Writing – original draft, Writing – review & editing), Hossein Haji Agha Alizade(Supervision, Validation, Writing – review & editing), Maryam Hajjami(Methodology, Software, Visualization, Writing – original draft, Writing – review & editing)
Institution: Bu-Ali Sina University
Language: English
Subfield: Fluid Flow and Transfer Processes
Field: Chemical Engineering
Domain: Physical Sciences
Keywords: ternary fuel blends, compression ignition engine, multi-objective optimization, Derringer desirability function, engine performance, vehicle emissions, NOx emissions, unburned hydrocarbons, brake specific fuel consumption, enthalpy of vaporization, flame quenching, micro-explosion, droplet breakup, engine speed, n-butanol
Open Access status: gold
Estimated APC paid: $1,207
Funder: Bu Ali Sina University
OpenAlex ID: W7236701983
