Design and Implementation of a Portable Electropneumatic Bottle Filling and Capping Machine with Relay-Based Control
Year: 2026
Type: preprint
Abstract: This paper presents the design, fabrication and testing of a compact, castor-mounted electropneumatic machine that feeds,fills and caps bottles automatically. Developed as a mechatronics capstone project for small-scale production and laboratory teaching, the machine carries bottles on a rotary indexing table, advanced by a ratchet-and-pawl mechanism, through pushing, filling and capping stations. Four double-acting pneumatic cylinders, each driven by a single-solenoid 5/2-way valve, perform the motions. The complete sequence is implemented in hard-wired 24 V DC relay logic built from 14 control relays, an on-delay timer that sets the fill period and a preset counter that groups bottles into sets of three, with end-position and bottle-presence sensors interlocking every station. The mechanism was modeled in SolidWorks and validated with a full-scale CNC-cut MDF mock-up before the final machine was built. The paper documents the pneumatic circuit and every relay rung, summarizes the set, seal-in and release conditions of each relay, and derives a simple timing model that links fill volume and throughput to the timer preset and the cylinder stroke times. The prototype performs a continuous fill-and-cap cycle without operator intervention, showing that low-cost relay logic can reproduce the sequencing and interlocking of a PLC-controlled packaging line while keeping every signal visible for teaching and fault-finding.
Source: Engineering Archive (engrXiv)
DOI: 10.31224/8842
Authors: Furqan Yousaf, Saad, Abdul Raheem
Institution: University of Engineering and Technology Lahore
Language: English
Subfield: Control and Systems Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W7236737299
