Sustainable low-carbon concrete evaluation through electrochemical impedance spectroscopy and data-driven modeling
Year: 2026
Type: article
Abstract: The research paper examines the performance of a low-clinker blended binder system including calcite, bentonite and ground granulated blast furnace slag (GGBS) in M30 grade concrete. The main aim of the research is to explore the effect of a combination of calcite, bentonite, and ground granulated blast furnace slag (GGBS) on the strength and durability properties of M 30 grade of concrete. The cement content was set at 50% with all mixes. A combination of calcite and bentonite, in equal proportions, was used to replace cement at levels of 0%, 5%, 10%, and 15%. The GGBS content was varied to 50%, 45%, 40% and 35% keeping a constant water to cement ratio of 0.45. This study will include an investigation into the fresh concrete properties such as slump and compaction factor, the chemical and mechanical properties, with and without CO 2 sequestration. Moreover, microstructural properties have been taken as a subject of X-Ray Diffraction (XRD). The electrochemical impedance spectroscopy (EIS) and the measurement of alternating current (AC) conductivity is further used to analyze the pore structure of the concrete. Autoregressive and tabular prior data fitting machine learning models were used to predict compressive, split tensile, and flexural strength using only experimental mechanical strength dataset. The models were highly accurate in the testing data with the highest results observed on compressive strength with the use of autoregressive model (R² = 0.9688), split tensile strength with the use of tabular fitting (R 2 = 0.9748) and flexural strength with the use of the autoregressive model (R 2 = 0.9657). These findings prove the possibility of the data-driven method to optimize concrete mix design and improve the sustainability performance. The designed blended binder system is believed to lower the embodied CO 2 emission by about 35–40% relative to traditional M 30 concrete, which is consistent with decarbonization of the world and a sustainable infrastructure objective.
Source: Scientific Reports
Authors: B. Narendra Kumar, Akkala Prasanna Divya Sai(Conceptualization, Investigation, Methodology, Writing – original draft), Siva Shanmukha Anjaneya Babu Padavala(Methodology, Validation, Visualization, Writing – original draft), Abraham Mengistu Gashe(Conceptualization, Validation, Visualization), Kandagal Nagaraja(Conceptualization, Investigation, Methodology, Validation, Visualization, Writing – original draft)
Language: English
Subfield: Civil and Structural Engineering
Field: Engineering
Domain: Physical Sciences
Keywords: low-carbon concrete, blended cement, calcite, bentonite, ground granulated blast furnace slag, cement replacement, CO2 sequestration, concrete durability, compressive strength prediction, splitting tensile strength, flexural strength, autoregressive models, pore structure, concrete microstructure, embodied CO2 emissions, concrete mix design
Open Access status: gold
Estimated APC paid: $2,690
OpenAlex ID: W7236737849
