Localized crack filling versus full impregnation for cracked flattened moso bamboo lamellae: Flexural performance and crack-zone morphology
Year: 2026
Type: article
Abstract: Cracks formed during industrial bamboo flattening reduce the mechanical reliability and marketable yield of otherwise usable lamellae. This study examined whether the spatial mode of epoxy application influences post-treatment flexural performance more strongly than the resin-to-curing-agent formulation. Cracked outer-layer lamellae of moso bamboo ( Phyllostachys edulis (Carrière) J.Houz.) were repaired by localized crack filling or full impregnation at resin-to-curing-agent mass ratios of 1:1, 2:1, and 3:1. Localized crack filling produced higher mean flexural strength and modulus than full impregnation at all three ratios. Two-way ANOVA showed significant associations of both factors with the flexural responses, with larger effect sizes for application strategy than formulation ratio for flexural strength (partial η² = 0.298 vs 0.208) and flexural modulus (partial η² = 0.441 vs 0.212). The 3:1 localized crack-filling treatment exhibited the highest mean flexural strength (286.36 MPa) and a flexural modulus of 25.33 GPa. SEM revealed qualitative differences in crack-zone morphology: localized filling was generally associated with epoxy concentrated within the crack and readily distinguishable adjacent fiber-bearing tissue, whereas full impregnation was associated with broader resin-affected regions and local heterogeneity or interfacial discontinuities. Localized crack filling also showed lower initial color differences than full impregnation, although short-term color changes varied with formulation, measurement region, and exposure time. Overall, localized crack filling, particularly at 3:1 under the tested conditions, provided the most balanced combination of flexural performance, crack-zone morphology, and initial visual compatibility, suggesting a practical route for retaining cracked outer-layer lamellae in visible furniture and interior decorative components. Because pretreatment crack dimensions and severity were not quantitatively recorded, these treatment differences should be interpreted within the sampled naturally cracked lamellae and verified further using specimens classified by initial crack characteristics.
Source: Industrial Crops and Products
Institution: Nanjing Forestry University
Language: English
Subfield: Plant Science
Domain: Life Sciences
Open Access status: gold
Estimated APC paid: $3,720
OpenAlex ID: W7236741249
