A two-phase flow model for low-permeability reservoirs coupling imbibition–displacement dynamics with water-injection-induced fractures
Year: 2026
Type: article
Abstract: High-pressure water injection into low-permeability tight sandstone reservoirs generates cyclic dynamic fractures that enhance flow capacity but risk inducing water channeling. Existing models assume static fractures and a single capillary-pressure curve, and so cannot capture the imbibition-displacement competition operating throughout water injection. Here we combine an embedded discrete fracture model with dual capillary-pressure and relative-permeability models that distinguish imbibition from displacement, yielding an oil-water two-phase flow model coupled to dynamic fracture evolution. Fracture initiation follows the Irwin stress-intensity-factor criterion, fracture geometry and flow properties are updated through an exponential stress-sensitivity equation, and the matrix-fracture equations are solved by a fully implicit finite-difference method. Validation against three core experiments reproduces the multi-peak fluctuation and multi-stage breakthrough of the injection pressure, with a computed breakthrough pressure of 3.0–4.5 MPa matching measurements. Induced fractures shorten the injection-production balance time from 153 to 68 min. An optimal fracture-length interval exists: displacement recovery reaches 61.58% at two-thirds of the fully penetrating length but falls to 40% once the fracture fully penetrates and induces channeling, while the shut-in imbibition oil increment rises from 1.97% to 5.89% as fracture length increases. This work clarifies the synergistic-competitive mechanism between dynamic fracture evolution and matrix imbibition-displacement.
Source: Scientific Reports
Authors: Yiming Li, Heyuan Zhang, Ning Wang, Wei Xia, Yusheng Xu
Institution: China University of Petroleum, Beijing
Language: English
Subfield: Fuel Technology
Field: Energy
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $2,690
OpenAlex ID: W7236748322
