A study of the influence of the properties of the dispersion working medium on the composition, structure, and properties of nickel electroerosion powders
Year: 2026
Type: article
Abstract: Purpose ‒ establishing the pattern of the influence of the working fluid on the composition, structure, and properties of nickel electroerosion powders in distilled water and aviation kerosene TS-1. Methods . In order to determine the main parameters of the metal powders under study, waste metal nickel was ground using a patented setup employing the method of electrical discharge dispersion. The EDD process was carried out in various working dielectric liquids, namely, distilled water and aviation kerosene. A comprehensive study of the powder materials included several stages of modern instrumental analysis. The microstructure of the powder particles was examined using scanning electron microscopy. The distribution of particles by size characteristics was determined using a laser-based particle size analyzer. The elemental composition of the powdered materials was determined using energy-dispersive X-ray spectroscopy integrated into an electron microscope. The phase composition of the powdered materials was determined using X-ray structural analysis with a diffractometer. Results. During the study, patterns were identified that link the composition and properties of the dielectric medium with the physicochemical characteristics of the resulting nickel powders. Analysis of the experimental data showed that the working medium has a significant effect on the elemental and phase composition of the powders; however, no influence of the dielectric constant of various working fluids on the size characteristics of nickel powder particles has been established. Nickel powders obtained in aviation kerosene are characterized by an increased carbon content on the particle surface. Nickel powders obtained in distilled water are characterized by the presence of the NiO oxide phase. Conclusion . The results of the conducted studies open up opportunities for creating new nickel-containing alloys. As a raw material, metal waste containing expensive nickel can be used, processed using the electroerosive dispersion method. Further work will make it possible to bring the composition and structure of the alloy to optimal parameters.
Authors: E. V. Ageeva, D. A. Ulitin, A. E. Andreeva
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: hybrid
OpenAlex ID: W7236773470
