Work

Effect of continuity plate size on the hysteretic response of a welded moment connection between an HEA beam and a square hollow structural section column

Year: 2026
Type: preprint
Abstract: Square hollow structural section (HSS) columns combined with light European HEA beams are an economical option for low-rise steel moment frames, such as those of social housing, but this combination is not covered by the prequalified connections of ANSI/AISC 358 or by the Colombian seismic code NSR-10. This study evaluates a welded moment connection between an HEA100 beam and a 150 × 150 × 9 mm square HSS column in which the beam flanges are joined to the column through two square continuity plates with complete-joint-penetration welds. A three-dimensional nonlinear finite element model was developed in ANSYS and validated against a full-scale cyclic test of a specimen with 190 mm × 12.7 mm plates. After calibrating the flexibility of the test supports, the model reproduced the positive peak force within 3% and the dissipated energy within 7%. A parametric study of 25 configurations, combining five plate side lengths (180–220 mm) and five thicknesses (8–19 mm), was then carried out under the cyclic loading protocol of ANSI/AISC 341 and NSR-10. At a connection rotation of 0.04 rad, the moment at the column face reached 1.64–1.71 times the beam plastic moment in all configurations, well above the minimum of 0.8 required for special moment frames. The maximum moment increased with the plate side length and was practically insensitive to the thickness, the initial stiffness increased with both parameters, and the energy dissipated within ± 0.04 rad increased with thickness and decreased with side length, ranging from 4.45 to 5.19 kJ.
Language: English
Open Access status: green
OpenAlex ID: W7236774362
Cites: 14
Cited by:
Related to: 10