Cutting Power, Surface Roughness and Sound Pressure in Circular Saw Ripsawing of Radiata Pine Plywood
Year: 2026
Type: preprint
Abstract: Direct measurement of cutting power and surface roughness is often impractical in plywood production. This study evaluated whether mean-square sound pressure could serve as a low-cost indicator of cutting power and roughness in plywood ripsawing. Two circular saw blade configurations (Saw A, 80 teeth; Saw B, 48 teeth) were tested on radiata pine plywood of three thicknesses (12, 15, 18 mm) at three feed speeds (7.5–11.8 m/min), giving 18 conditions with cutting power, roughness (Ra, Rz) and sound pressure recorded. Cutting power was associated with blade configuration, feed speed and panel thickness, with a blade × thickness interaction (R² = 0.98; leave-one-out Q² = 0.96, repeating the choice of the interaction within each fold); thickness was confounded with panel, and modulus of elasticity did not explain variation (p = 0.30). Roughness did not differ between blades; only panel thickness was significant (p < 0.03). Sound pressure discriminated blade configuration (p < 0.001) but, pooled across blades, not thickness or feed speed. Its overall correlation with cutting power (r = 0.89) reflected separate blade clusters: within Saw A it was strong (r = 0.81), whereas within Saw B none was detected (r = − 0.35; n = 9). Sound pressure was not correlated with roughness, overall (|r| < 0.06; n = 18) or within each blade (|r| < 0.49, p > 0.18; n = 9). An exploratory single-predictor model estimated cutting power moderately within Saw A (Q² = 0.54) but failed within Saw B (Q² = −2.8); general use requires validation.
Source: Research Square
Authors: Alfredo Aguilera, José Luis Barros
Institution: Universidad Austral de Chile
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
Funder: Universidad Austral de Chile
OpenAlex ID: W7236781444
