Work

Submerged-arc Welding Slag as a Partial Cement Replacement in Mortar: Physicochemical Characterization and Performance up to 56 Days

Year: 2026
Type: article
Abstract: Submerged-arc welding generates a mineral slag that is commonly landfilled despite containing oxides relevant to cementitious systems. This study investigated ground submerged-arc welding slag (SAWS) as a mass-based partial replacement for Portland cement in mortar. The slag was characterized by X-ray fluorescence, X-ray diffraction, laser particle-size analysis, pycnometry, and a lime-based pozzolanic activity test. Mortars with 0% (reference), 25%, and 50% cement replacement were produced at a binder-to-sand ratio of 1:3 and a water-to-binder ratio of 0.50. Consistency, compressive strength, flexural tensile strength, mass loss, dry and saturated density, air void, and water absorption were evaluated; strength was measured at 3, 7, 28, 42, and 56 days. SAWS had a density of 3.42 g cm−3, D50 of 12.79 μm, and was dominated by CaO, MgO, SiO2, and Al2O3. Although XRD indicated a substantial amorphous contribution, the tested slag failed the compositional and lime-reactivity thresholds for classification as a pozzolanic material. Increasing replacement reduced fresh consistency and mechanical strength. Nevertheless, the 25% mixture developed 21.3 MPa compressive strength at 56 days and reached 5.6 MPa flexural strength, statistically comparable in magnitude to the control mean at that age. Bulk-density, air void, and absorption indicators changed by less than 6% across mixtures. The results identify 25% replacement as the technically preferable level among those tested for non-structural mortar applications, while highlighting the need for durability, leaching, and mechanistic validation before field implementation
Source: Artefactum
Language: English
Open Access status: diamond
OpenAlex ID: W7236817702
FWCI:
Cites:
Cited by:
Related to: 10