A study of the pressing and sintering process of the R6M5K5 steel charge obtained by electroerosive dispersion
Year: 2026
Type: article
Abstract: The purpose of the work was to produce blanks from a powder mixture of high‑speed steel grade R6M5K5, formed using electroerosive dispersion, by applying specified pressing and subsequent sintering regimes. As part of the study, the influence of the applied pressure during forming on the density of the resulting blanks was assessed, and the patterns of change in the linear dimensions and shrinkage of the material during the sintering process were established. Methods. The starting material for the experimental studies was a powder charge of high-speed steel of the R6M5K5 grade, obtained by the method of electrical discharge dispersion. The powder material under study was formed using a press mold specially manufactured for the experiment. After completing the pressing operation, the formed blanks were subjected to heat treatment by the sintering method. For this operation, the blanks were placed in a graphite crucible, after which the crucible was placed in the working chamber of the EKPZ-10 furnace for heating casting molds. The heat treatment was carried out by sequentially holding the material at the specified temperature regimes. The holding time at a temperature of 450°C was 60 minutes, at 900°C ‒ 120 minutes, and when the temperature reached 1115°C, the holding time was 150 minutes. Results . Based on the results of the experiments, it was established that increasing the pressing force from 5 to 10 tons leads to an increase in the density of the formed workpiece by approximately 1%. The observed change in density is due to more intensive compaction of the powdered material as the external mechanical stress increases. Conclusion . The results of the work carried out can be used as a basis for subsequent research into the features of the structure formation of high‑speed steel P6M5K5, obtained from powder using the electroerosive dispersion method. The obtained dependencies can also be used when selecting and optimizing the technological parameters of pressing and sintering the powder charge for the manufacture of workpieces with specified operational properties.
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: hybrid
OpenAlex ID: W7236818099
