Cement-Based Hybrid Heating Composites Obtained Using 3D Printing
Year: 2026
Type: article
Abstract: Electrically conductive cementitious composites offer significant potential for self-heating applications, but conventional approaches require conductive additives throughout the material. This study proposes a hybrid composite combining 3D-printed conductive pathways with a conventional cementitious matrix, enabling localized heating while reducing additive consumption. Cement pastes containing 0.50–1.25 wt.% chopped carbon fibers (CFs) were characterized using electrical resistivity, impedance spectroscopy, and Joule-heating tests. The electrical percolation threshold was exceeded above 0.75 wt.% CF, with a marked improvement in heating performance between 0.75 and 1.00 wt.%. At 15 V, specimens containing 1.0 wt.% CF reached 68 °C within approximately 25 min, achieving a surface power density of around 1 kW/m2. A printable mixture containing 1.0 wt.% CF and 0.50 wt.% hydroxypropyl methylcellulose (HPMC) was subsequently developed to produce conductive pathways integrated into a conventionally cast matrix. Thermal imaging confirmed localized heat generation and effective heat transfer through the specimen. Increasing the applied voltage from 20 to 30 V raised the temperature above the conductive pathway from approximately 33 to 42 °C after 60 min. These findings demonstrate the potential of combining additive and conventional manufacturing to develop smart cementitious components with spatially controlled heating while limiting conductive additives to functionally relevant areas.
Source: Materials
DOI: 10.3390/ma19224895
Authors: Paulina Szołdra(Conceptualization, Data curation, Formal analysis, Investigation, Methodology, Validation, Visualization, Writing – original draft, Writing – review & editing), Maksymilian Frąc(Data curation, Formal analysis, Investigation, Methodology, Validation, Writing – original draft), Kristina Roder(Investigation), Shaun George Antony(Investigation), Daisy Nestler(Supervision), Jonas Stiller(Investigation), Lothar Kroll(Supervision), Waldemar Pichór(Conceptualization, Funding acquisition, Methodology, Project administration, Resources, Supervision, Visualization, Writing – review & editing)
Institutions: AGH University of Krakow, Chemnitz University of Technology
Language: English
Subfield: Civil and Structural Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $3,137
Funder: Narodowe Centrum Nauki
OpenAlex ID: W7236824169
