Work

Design and Implementation of a Self-Adaptive and Performance-Optimized Five-Stage RISC-V Processor on FPGA

Year: 2026
Type: article
Abstract: Pipelining raises processor throughput but introduces data, control and structural hazards, and a fixed optimization strategy often performs unevenly across different workloads. This paper presents the design and FPGA implementation of a self-adaptive, performance-optimized five-stage pipelined RISC-V processor described in Verilog HDL. The processor has Instruction Fetch, Instruction Decode, Execute, Memory Access and Write Back stages separated by four pipeline registers, with forwarding, load-use hazard detection, stalling and branch flushing. A performance-monitoring unit records clock cycles, stalls, forwarding events and taken branches, and an adaptive workload controller uses this information to guide the optimization behavior. The design was simulated and implemented in AMD Vivado 2026.1 on a Xilinx Artix-7 XC7A35T-1CSG324C FPGA and demonstrated on the development board with an OLED display. All individual functional tests and all 25 adaptive-optimization verification cases passed. The implementation uses 1615 slice LUTs (7.76 %) and 1502 slice registers (3.61 %). After optimization, the worst negative slack improved from −98.841 ns to +3.265 ns and the estimated on-chip power fell from 0.084 W to 0.074 W (11.90 %). The adaptive processor reduced execution cycles from 44 to 40 on one workload and from 45 to 41 (8.89 %) on a branch-heavy workload, while four other workloads were unchanged. The benefit therefore depends on workload characteristics, and wider benchmarking is needed to establish general performance.
Language: English
Open Access status: green
OpenAlex ID: W7236847091
FWCI:
Cites:
Cited by:
Related to: 10