A Post-Processing Framework for Crack–Hole Interaction: Amplification, Deflection, and Capture Across Eight Geometries
Year: 2026
Type: article
Abstract: Holes are widely proposed as crack arrestors, but crack-growth simulations usually report the crack path without defining arrest in a linear-elastic model or explaining its mechanism. This paper proposes a post-processing framework for crack–hole interaction and applies it to previously reported ANSYS SMART simulations of eight hole-bearing geometries. The framework combines a matched-pair hole amplification factor Λ (the mode-I stress-intensity ratio with and without holes at equal crack extension), a steering angle reconstructed from KI and KII, a three-regime classification (capture, deflection and escape, hole switching), and a distinction between geometric and mechanical arrest. In the three-point-bending beam the perforated crack ends at the middle hole although KI is 1.6–2.1 times that of the hole-free beam, so termination reflects capture, not relief; the four-point-bending specimen gives Λ ≈ 1.1–1.5. Handbook-based estimates for the modified CT specimens and the one-hole plate also exceed 1, but the source data for these cases are inconsistent, so the estimates are indicative only and are not counted as evidence. A persistent sign of KII identifies the capturing hole in the notched plate and CT specimens, and a 0.8 mm shift in the pre-crack changes the hole captured; this sensitivity comes from single runs and has not yet been checked for numerical convergence. A reporting protocol specifies the further runs needed, including convergence checks of the crack path and a hole-free twin of the modified CT specimen. The conclusions rest on signs, trends and ratios and are testable hypotheses, not a universal arrest criterion.
Source: Applied Sciences
DOI: 10.3390/app162211520
Institution: Jazan University
Language: English
Subfield: Mechanics of Materials
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $2,896
OpenAlex ID: W7237209482
