Tandem solar cells based on Si and stable Cu(In,Ga)S2 with efficiency beyond the bottom cell
Year: 2026
Type: article
Abstract: Tandem solar cells require stable, highly efficient top cells with a band gap above 1.6eV. We present a semitransparent solar cell with an efficiency of 15.52% and an open circuit voltage of 1.014V, based on an environmentally stable sulfide chalcopyrite absorber and ITO back contact. Solar cells are prepared by industrially scalable processes of co-evaporation, sputter and atomic layer deposition. The progress in efficiency is achieved by alloying with small amounts of Ag (less than 10% of Cu replaced by Ag). Optimum amount of Ag alloying is shown to depend on the amount of Cu-excess during absorber growth. Ag alloying leads to larger grains, avoids high Ga phases, and reduces non-radiative recombination, which improves open circuit voltage. Whether the reduction in non-radiative recombination is due to an increase in net doping or due to a longer minority carrier lifetime appears to depend on the Cu-excess during process. The efficiency of the top cell remains stable over several months’ storage in a non-controlled atmosphere. We combine this new top cell in a tandem cell with both Si and CuInSe2 bottom cells, in both cases, the efficiency beyond the bottom cell alone by between 2.5 and 5% absolute.
Source: Apollo
DOI: 10.17863/cam.137196
Author: Oliver, Rachel
Language: English
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W7237333380
FWCI:
Cites:
Cited by:
Related to:
