Performance evaluation of conventional and hybrid nanofluids for heat transfer enhancement in circular microchannel heat exchangers
Year: 2026
Type: article
Abstract: The increasing demand for compact and efficient thermal-management systems has stimulated interest in nanofluids as advanced working fluids for microchannel heat exchangers. In the present study, the thermal and hydraulic performance of a circular counter-flow microchannel heat exchanger using water, Al₂O₃–water, Cu–H 2 O, Graphene–Al₂O₃/ H 2 O, and MXene–Al₂O₃/ H 2 O nanofluids was numerically investigated. Since the present study is entirely numerical, the nanofluids were modeled as homogeneous, adequately dispersed, and stable, without experimental stability characterization such as zeta-potential, sedimentation, or TEM analysis. The effects of Reynolds number (200–1000) and nanoparticle volume fraction (0–5 vol%) on the Nusselt number, convective heat-transfer coefficient, pressure drop, friction factor, pumping power, and thermal–hydraulic performance factor (THPF) were systematically evaluated. The results demonstrate that the incorporation of nanoparticles enhances heat-transfer performance, with hybrid nanofluids exhibiting greater enhancement than conventional nanofluids. At the optimum investigated condition, the Nusselt number increased by 12.87%, 18.81%, 28.71%, and 35.64% for Al₂O₃– H 2 O, Cu– H 2 O, Graphene–Al₂O₃/ H 2 O, and MXene–Al₂O₃/ H 2 O, respectively, relative to water. The corresponding convective heat-transfer coefficient increased by 57.0%, 71.0%, 91.0%, and 105.0%, respectively, with MXene–Al₂O₃/ H 2 O exhibiting the highest thermal enhancement. The maximum pressure drop and friction factor for MXene–Al 2 O₃/ H 2 O increased by 55.7% and 22.8%, respectively, in comparison to water, but this improvement was accompanied by increased hydraulic resistance. With a maximum improvement of 22.9% for MXene–Al 2 O₃/ H 2 O, the THPF remained above unity throughout the investigated range despite these penalties, suggesting that the thermal benefit outweighed the additional pumping requirement. Additionally, empirical correlations with coefficients of determination greater than 0.99 were created from the numerical results for forecasting the thermal and hydraulic performance parameters within the examined operating range. Among the fluids examined, MXene–Al 2 O₃/water showed the best overall thermal–hydraulic performance, suggesting that it could be further studied as a working fluid in compact microchannel heat exchangers.
Source: Next Nanotechnology
Language: English
Subfield: Fluid Flow and Transfer Processes
Field: Chemical Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $1,280
OpenAlex ID: W7237339708
