Research on the calculation method of flexural bearing capacity of wet joints of prefabricated concrete bridge beams based on the strut and tie model
Year: 2026
Type: article
Abstract: Wet joints in prefabricated concrete bridge beams constitute typical disturbed regions (D-regions), where geometric change, reinforcement discontinuity, and material heterogeneity invalidate conventional beam theory. This study proposes a two-level analytical framework for UHPC wet joints: the strut-and-tie model (STM) is first used to represent the internal force-transfer mechanism of the joint region, and a sectional equilibrium analysis is then employed to convert the governing tie-strut state into positive-section flexural capacity. To adapt STM to UHPC wet joints, an effective UHPC participation area is defined from the average crack spacing, and a UHPC-oriented effective compressive-strength coefficient is introduced for the concrete strut. For keyed interfaces, an interface tensile-strength reduction coefficient is further proposed to represent the combined influence of interfacial weakening, mechanical interlocking, and local stress concentration. Four-point bending tests were conducted on specimens with rectangular, rhombus, and Chinese “干”-shaped keyways while keeping joint width, lap form, reinforcement arrangement, material class, and loading scheme unchanged. The proposed method reproduced the test and literature database with a mean error of 11% and a standard deviation of 0.13. Within the investigated parameter range, recommended reduction coefficients are 0.45 for rectangular joints, 0.40 for rhombus joints, and 0 for the “干”-shaped joint. The results show that stronger mechanical interlocking shifts the critical crack path away from the interface and promotes a more stable yielding of longitudinal reinforcement. The proposed method is intended for the investigated laboratory-scale UHPC wet joints; direct extrapolation to other keyway geometries, dimensions, reinforcement ratios, or full-scale bridge prototypes requires further calibration and larger-scale validation.
Source: Advances in Bridge Engineering
Language: English
Subfield: Building and Construction
Field: Engineering
Domain: Physical Sciences
Open Access status: diamond
OpenAlex ID: W7237340974
