Effects of Oxygen Transfer Rates on the Bioanode Potential in Long-Term-Operated Terracotta Microbial Fuel Cells
Year: 2026
Type: article
Abstract: In a single-chamber microbial fuel cell with an air cathode, the substrate-converting anaerobic biofilm at the anode produces electrons and protons. Efficient transfer of both products to the cathode improves the electric circuit performance. Minimizing the transfer resistance through the electrolyte can increase the undesired oxygen transfer in the reverse direction. This study examines how controlling the availability of dissolved oxygen as a terminal electron acceptor influences the bioanode’s electrode potential in membrane-free cells with a scalable design using low-cost terracotta separators that also provide structural support. The oxygen mass transfer rate varied with the regulation of the oxygen concentration in the air-cathode chamber. The anodes rapidly lost their negative potential below a substrate concentration of 300 mg O2 L–1 chemical oxygen demand in the municipal wastewater and 21 vol.% O2 at the air-cathode. When the oxygen concentration in the air-cathode chamber was reduced to 10 vol.%, the current density increased significantly while the separator-facing anode potentials remained below −200 mV (SHE) at the maximum power point. Cells with thinner separators and lower transfer resistance produced higher power. The cathodes performed stably under O2-limited conditions. However, the NH4–N elimination rate decreased to only 0.82 g NH4–N d–1 m–2 (±0.63). All cells exhibited stable performance without maintenance for over 400 days.
Source: ACS Omega
Institution: Ruhr University Bochum
Language: English
Subfield: Environmental Engineering
Field: Environmental Science
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $1,935
OpenAlex ID: W7237360394
