Pyrolysis of biomass and biorefinery residual materials for production of advanced biofuels
Year: 2012
Type: dissertation
Abstract: The work carried out throughout this project has helped to further advance the area of\nbiomass pyrolysis for the production of bio-oil. During the early stage of the project, the\nfocus was on investigating the effect of different processing parameters and feedstock\ncomposition on the pyrolysis products. A major part of this work involved studying the\neffect of pressure during conventional pyrolysis. Pyrolysis was also carried out on the\nresidue which remained after the biomass acid hydrolysis process, this is primarily\nlignin. This investigation has shown that thermal treatment alone is not an adequate\nmethod for converting acid hydrolysis residue to valuable products.\nFollowing on from this work biomass hydropyrolysis with catalytic conditioning of the\nproduct vapours was investigated as a possible method of producing a high grade bio-oil\nand to increase the level of biomass conversion. For this work various Ni supported\ncatalyst were utilised for vapour upgrading. Furthermore a study was carried out to\nexamine the effect of hydrogen pressure during hydropyrolysis. This work looked at\npressure ranging from ambient to 30 bar. At elevated pressure major improvements of\nthe vapour composition were achieved. The resulting vapours in the presence of the Ni\ncatalyst at 30 bar were highly deoxygenated and also contained no carboxylic acids.\nThis investigation has shown that hydropyrolysis at elevated pressure has many\nadvantages over conventional pyrolysis as a large amount of oxygen is removed from\nthe bio-oil, thus increasing the stability of the product. Furthermore a large portion of\nthe aromatic compounds were either fully or partially hydrogenated.
Author: F. Melligan
Language: English
Subfield: Fuel Technology
Field: Energy
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W842403600
