Get started
Author

Martine WÉRY

Observed names: Depétris-Wery, Martine, M Depetris-Wery, M Wery, M. DEPETRIS-WERY, M. De Petris Wery, M. De Petris-Wery, M. De-Petris Wery, M. DePetris-Wery, M. Depetris-Wery, M. WERY, M. Wery, M. Wéry, Martine DEPETRIS-WERY, Martine DEPÉTRIS-WERY, Martine DEPÉTRIS-WÉRY, Martine WERY, Martine Wery, Martine Wery-De Petris, Martine Wéry, Petris-Wery, M. De, WERY, Martine, Wery, M.
Observed institutions: Université Paris-Sud, Commissariat à l'Énergie Atomique et aux Énergies Alternatives, Université Paris-Saclay, CEA Paris-Saclay - Etablissement de Saclay, Franche-Comté Électronique Mécanique Thermique et Optique - Sciences et Technologies, Instituts Universitaires de Technologie, Direction des Energies, CEA Paris-Saclay, Université de Franche-Comté
ORCID: 0000-0001-7997-9749
Observed ORCID: 0000-0001-7997-9749
OpenAlex ID: A5013477477
Behavior of aluminum electrodes in electrocoagulation process
2007 · G. Mouedhen, M. Feki, et al. · Journal of Hazardous Materials · 526
Electrochemical removal of Cr(VI) from aqueous media using iron and aluminum as electrode materials: Towards a better understanding of the involved phenomena
2009 · G. Mouedhen, M. Feki, et al. · Journal of Hazardous Materials · 148
Role of copper and aluminum additions on the hydrogen embrittlement susceptibility of austenitic Fe–Mn–C TWIP steels
2014 · T. Dieudonné, L. Marchetti, et al. · Corrosion Science · 88
A one-step electrochlorination/electroflotation process for the treatment of heavy metals wastewater in presence of EDTA
2013 · A. Khelifa, S. Aoudj, et al. · Chemical Engineering and Processing - Process Intensification · 70
Hydrogen permeation in iron at different temperatures
2005 · H. Addach, P. Berçot, et al. · Materials Letters · 59
Role of copper and aluminum on the corrosion behavior of austenitic Fe–Mn–C TWIP steels in aqueous solutions and the related hydrogen absorption
2014 · T. Dieudonné, L. Marchetti, et al. · Corrosion Science · 58
Friction and wear behaviour of cp Ti and Ti6Al4V following nitric acid passivation
2006 · M. Masmoudi, M. Assoul, et al. · Applied Surface Science · 57
Formation of the main atmospheric zinc end products: NaZn4Cl(OH)6SO4 · 6H2O, Zn4SO4(OH)6 · nH2O and Zn4Cl2(OH)4SO4 · 5H2O in [Cl−] [ SO42−] [ HCO3−] [H2O2] electrolytes
1999 · Vincent Ligier, Martine Wéry, et al. · Corrosion Science · 55
Long-time anodisation of titanium in sulphuric acid
2007 · D. Capek, M.-P. Gigandet, et al. · Surface and Coatings Technology · 50
Optimization of anodic layer properties on aluminium in mixed oxalic/sulphuric acid bath using statistical experimental methods
2007 · W. Bensalah, K. Elleuch, et al. · Surface and Coatings Technology · 45
Characterization of thin Zn–Ni alloy coatings electrodeposited on low carbon steel
2007 · A. El Hajjami, M.P. Gigandet, et al. · Applied Surface Science · 43
Friction coefficient and microhardness of anodized aluminum alloys under different elaboration conditions
2015 · M. GUEZMIL, W. BENSALAH, et al. · Transactions of Nonferrous Metals Society of China · 41
Thick and Dense Anodic Oxide Layers Formed on Aluminum in Sulphuric Acid Bath
2010 · W. Bensalah, M. Feki, et al. · Journal of Material Science and Technology · 38
Comparative study of mechanical and tribological properties of alumina coatings formed on aluminium in various conditions
2009 · W. Bensalah, K. Elleuch, et al. · Materials & Design (1980-2015) · 37
Kinetic and morphological investigation of CoFe alloy electrodeposition in the presence of organic additives
2003 · F Lallemand, L Ricq, et al. · Surface and Coatings Technology · 34
Effect of Test Parameters on the Friction Behaviour of Anodized Aluminium Alloy
2014 · M. Guezmil, W. Bensalah, et al. · International Scholarly Research Notices · 31
Hydrogen permeation inhibition by zinc–nickel alloy plating on steel XC68
2008 · A. El hajjami, M.P. Gigandet, et al. · Applied Surface Science · 31
The influence of organic additives on the electrodeposition of iron-group metals and binary alloy from sulfate electrolyte
2004 · F. Lallemand, L. Ricq, et al. · Applied Surface Science · 31
Effects of alkaline etching on the surface roughness of a fibre-reinforced epoxy composite
2002 · X. Roizard, M. Wery, et al. · Composite Structures · 28
Chemical dissolution resistance of anodic oxide layers formed on aluminum
2011 · W. BENSALAH, M. FEKI, et al. · Transactions of Nonferrous Metals Society of China · 26
Composition control of tin–zinc electrodeposits through means of experimental strategies
2007 · S. Dubent, M. De Petris-Wery, et al. · Materials Chemistry and Physics · 26
The effect of ultrasonic frequency and intensity upon electrode kinetic parameters for the Ag(S2O3)23−/Ag redox couple
1999 · B. Pollet, J.P. Lorimer, et al. · Journal of Applied Electrochemistry · 26
Wear behaviour of nitric acid passivated cp Ti and Ti6Al4V
2008 · M. Masmoudi, M. Assoul, et al. · Journal of Alloys and Compounds · 23
Multicriteria optimization of mechanical and morphological properties of chromium electrodeposits under reverse pulse plating
2007 · L. Hallez, M. De Petris-Wery, et al. · Journal of Applied Electrochemistry · 22
The effects of 20 kHz and 500 kHz ultrasound on the corrosion of zinc precoated steels in [Cl−] [SO2−4] [HCO−3] [H2O2] electrolytes
2001 · V. Ligier, J.Y. Hihn, et al. · Journal of Applied Electrochemistry · 22
Works count: 84
Citation count: 1,974
H-index: 23
I10-index: 40
Year
Topic
Type