Author

Chidambara Kuttalam Kailasanathan

Observed names: C Kailasanathan, C. Kailasanathan, Kailasanathan C.

Observed institution: KCG College of Technology

ORCID: 0000-0002-4744-9548

Observed ORCID: 0000-0002-4744-9548

OpenAlex ID: A5024257503

Effect of ZrB2 on microstructural, mechanical and corrosion behaviour of aluminium (AA7178) alloy matrix composite prepared by the stir casting route

2021 · S. Dinesh Kumar, M. Ravichandran, et al. · Ceramics International · 158

A new assessment on mechanical properties of jute fiber mat with egg shell powder/nanoclay-reinforced polyester matrix composites

2018 · K. Ganesan, C. Kailasanathan, et al. · Journal of Natural Fibers · 124

Experimental investigation on the effects of cerium oxide nanoparticle on Calophyllum inophyllum (Punnai) biodiesel blended with diesel fuel in DI diesel engine modified by nozzle geometry

2015 · G. Vairamuthu, S. Sundarapandian, et al. · Journal of the Energy Institute · 122

Investigation on un-peened and laser shock peened dissimilar weldments of Inconel 600 and AISI 316L fabricated using activated-TIG welding technique

2018 · G. Chandrasekar, C. Kailasanathan, et al. · Journal of Manufacturing Processes · 81

Assessment on hybrid jute/coir fibers reinforced polyester composite with hybrid fillers under different environmental conditions

2021 · K. Ganesan, C. Kailasanathan, et al. · Construction and Building Materials · 74

PDF

Analysis of mechanical properties and optimization of gas tungsten Arc welding (GTAW) parameters on dissimilar metal titanium (6Al 4V) and aluminium 7075 by Taguchi and ANOVA techniques

2016 · K. Nandagopal, C. Kailasanathan · Journal of Alloys and Compounds · 72

Strength characterization of caryota urens fibre and aluminium 2024-T3 foil multi-stacking sequenced SiC-toughened epoxy structural composite

2020 · V. Antony Vincent, C. Kailasanathan, et al. · Biomass Conversion and Biorefinery · 71

Study on the evaluation of mechanical and thermal properties of natural sisal fiber/general polymer composites reinforced with nanoclay

2016 · B. Venkatram, C. Kailasanathan, et al. · International Journal of Polymer Analysis and Characterization · 58

Structure and properties of titania reinforced nano-hydroxyapatite/gelatin bio-composites for bone graft materials

2011 · C. Kailasanathan, N. Selvakumar, et al. · Ceramics International · 58

Physico-chemical and Morphological Characterization of Cellulose Fibers Extracted from Sansevieria roxburghiana Schult. & Schult. F Leaves

2020 · M. Gopi Krishna, C. Kailasanathan, et al. · Journal of Natural Fibers · 48

Comparative study of hydroxyapatite/gelatin composites reinforced with bio-inert ceramic particles

2012 · C. Kailasanathan, N. Selvakumar · Ceramics International · 47

Fabrication and Characterization of Hybrid Natural Fibre-Reinforced Sandwich Composite Radar Wave Absorbing Structure for Stealth Radomes

2021 · V. Antony Vincent, C. Kailasanathan, et al. · Transactions on Electrical and Electronic Materials · 44

Experimental investigation on stir casted hybrid composite AA7068 with SiC and coconut shell fly ash

2022 · S. Kolappan, T. Arunkumar, et al. · Materials Today Proceedings · 42

Effect of MoO3 ceramic oxide reinforcement particulates on the microstructure and corrosion behaviour of Al alloy composites processed by P/M route

2020 · B. Stalin, G.T. Sudha, et al. · Materials Today Communications · 38

Evaluation of EDM process parameters on titanium alloy through Taguchi approach

2020 · A. Perumal, C. Kailasanathan, et al. · Materials Today Proceedings · 36

Multiresponse Optimization of Wire Electrical Discharge Machining Parameters for Ti-6Al-2Sn-4Zr-2Mo (α-β) Alloy Using Taguchi-Grey Relational Approach

2022 · A. Perumal, C. Kailasanathan, et al. · Advances in Materials Science and Engineering · 35

PDF

Investigation on wear characteristics of Al 2219/Si3N4/Coal bottom ash MMC

2022 · K. Subramani, T. Arunkumar, et al. · Materials Today Proceedings · 32

Investigation on un-peened and laser shock peened weldment of Inconel 600 fabricated by ATIG welding process

2017 · G. Chandrasekar, C. Kailasanathan, et al. · Materials Science and Engineering A · 31

Experimental investigation on workability and strain hardening behaviour of Fe–C–Mn sintered composites with different percentage of carbon and manganese content

2013 · A.P. Mohan Raj, N. Selvakumar, et al. · Materials & Design (1980-2015) · 30

Optimization of Welding Parameters, Influence of Activating Flux and Investigation on the Mechanical and Metallurgical Properties of Activated TIG Weldments of AISI 316 L Stainless Steel

2017 · G. Chandrasekar, C. Kailasanathan, et al. · Transactions of the Indian Institute of Metals · 28

Study on formability and strain hardening index: influence of particle size of boron carbide (B4C) in magnesium matrix composites fabricated by powder metallurgy technique

2020 · P R Rajkumar, C Kailasanathan, et al. · Materials Research Express · 22

PDF

Sustainable fiber extraction and determination of mechanical and wear properties of Borassus flabellifer sprout fiber-reinforced polymer composites

2024 · B. NagarajaGanesh, B. Rekha, et al. · Biomass Conversion and Biorefinery · 21

Thermal Analysis and Optimization of Nano Coated Radiator Tubes Using Computational Fluid Dynamics and Taguchi Method

2020 · Sudalai Suresh Pungaiah, Chidambara Kuttalam Kailasanathan · Coatings · 19

PDF

Modeling and fabrication of automatic blackboard dust remover

2020 · V. Mohanavel, C. Kailasanathan, et al. · Materials Today Proceedings · 15

Influence of Optimization Techniques on Wire Electrical Discharge Machining of Ti–6Al–2Sn–4Zr–2Mo Alloy using Modeling Approach

2021 · A. Perumal, A. Azhagurajan, et al. · Journal of Inorganic and Organometallic Polymers and Materials · 14

Works count: 49

Citation count: 1,418

H-index: 21

I10-index: 29