Get started
Author

John R. Stoup

Observed names: J R Stoup, J Stoup, J. Stoup, J.R. Stoup, John R Stoup, John Stoup, Stoup, John
ORCID: 0000-0003-3189-0889
Observed ORCID: 0000-0003-3189-0889
OpenAlex ID: A5025017993
Fiber deflection probe for small hole metrology
2005 · B. Muralikrishnan, J.A. Stone, et al. · Precision Engineering · 96
Uncertainty and dimensional calibrations
1997 · T. Doiron, J. Stoup · Journal of Research of the National Institute of Standards and Technology · 50
PDF
CCM key comparison in the pressure range 0.05 MPa to 1 MPa (gas medium, gauge mode). Phase A1: Dimensional measurements and calculation of effective area
1999 · G F Molinar, B Rebaglia, et al. · Metrologia · 23
PDF
A fiber probe for CMM measurements of small features
2005 · Jack A. Stone, Bala Muralikrishnan, et al. · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · 16
Measurements of large silicon spheres using the NIST M48 coordinate measuring machine
2003 · John Stoup, Theodore Doiron · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · 14
Uncertainties in aspheric profile measurements with the geometry measuring machine at NIST
2005 · Ulf Griesmann, Nadia Machkour-Deshayes, et al. · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · 13
Physical Models and Dimensional Traceability of WR15 Rectangular Waveguide Standards for Determining Systematic Uncertainties of Calibrated Scattering-Parameters
2020 · Jeffrey A. Jargon, Dylan F. Williams, et al. · 12
PDF
Accuracy and versatility of the NIST M48 coordinate measuring machine
2001 · John R. Stoup, Theodore D. Doiron · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · 12
Performing three-dimensional measurements on micro-scale features using a flexible coordinate measuring machine fiber probe with ellipsoidal tip
2012 · B Muralikrishnan, J Stone, et al. · Measurement Science and Technology · 11
Form-Profiling of Optics Using the Geometry Measuring Machine and the M-48 CMM at NIST
2006 · Nadia Machkour-Deshayes, John Stoup, et al. · Journal of Research of the National Institute of Standards and Technology · 11
PDF
Sphere diameter interferometry with nanometer uncertainty
2019 · Eric Stanfield, John Stoup, et al. · Metrologia · 10
Measuring Step Gauges Using the NIST M48 CMM
2011 · John Stoup, Bryon Faust · NCSLI Measure · 10
Area measurement of knife-edge and cylindrical apertures using ultra-low force contact fibre probe on a CMM
2008 · B Muralikrishnan, J A Stone, et al. · Metrologia · 10
PDF
A novel high accuracy micrometer for the measurement of diameter
2020 · John Stoup, Ted Doiron · Metrologia · 8
Minimizing errors in phase change correction measurements for gauge blocks using a spherical contact technique
1998 · John R. Stoup, Bryon S. Faust, et al. · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · 8
Minimizing error sources in gauge block mechanical comparison measurements
1998 · Bryon S. Faust, John R. Stoup, et al. · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · 8
Conversion of a piston–cylinder dimensional dataset to the effective area of a mechanical pressure generator
2024 · Patrick F Egan, Eric S Stanfield, et al. · Metrologia · 7
PDF
Diameter and Form Measurement of a Micro-hole in a Fuel Injector Nozzle With the Nist Fiber Probe | Nist
2009 · Balasubramanian Muralikrishnan, Jack A. Stone, et al. · 5
Final Report on SIM.L-K1 (SIM.4.2) Regional Comparison. Stage One: Calibration of gauge blocks by optical interferometry
2007 · J E Decker, J Altschuler, et al. · Metrologia · 5
Physical models and dimensional traceability of 2.4 mm coaxial airline standards for determining systematic uncertainties of calibrated scattering-parameters
2023 · Jeffrey A Jargon, Dylan F Williams, et al. · 4
PDF
NORAMET comparison of gauge block measurement by optical interferometry
1999 · J E Decker, A Lapointe, et al. · Metrologia · 3
Case against optical gauge block metrology
1998 · Theodore D. Doiron, Dennis Everett, et al. · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · 3
Calibration of 1-D CMM artefacts: step gauges (EURAMET.L-K5.2016)
2020 · Tim Coveney, Michael Matus, et al. · Metrologia · 2
Non-nulling protocols for fast, accurate, 3-D velocity measurements in stacks
2023 · Iosif I. Shinder, Aaron N. Johnson, et al. · Journal of the Air & Waste Management Association · 1
PDF
Final report on APMP Regional Comparison APMP.L-K5: Calibration of step gauge
2012 · Taebong Eom, Gao Sitian, et al. · Metrologia · 1
Works count: 60
Citation count: 349
H-index: 10
I10-index: 13
Year
Topic
Type