Get started
Author

Zdeněk Krajíček

Observed names: Krajíček, Zdeněk, Z Krajicek, Z Krajíček, Z. Krajíček, Zdenek Krajicek, Zdenek Krajícek
OpenAlex ID: A5032239155
The use of diaphragm bellows to construct a constant pressure gas flowmeter for the flow rate range 10−7 Pa m3 s−1to 10−1 Pa m3 s−1
2007 · T Gronych, L Peksa, et al. · Metrologia · 15
Method of measuring the change in volume of a diaphragm bellows used in a volume displacer of a constant-pressure gas flowmeter (with a practical guide)
2011 · L. Peksa, T. Gronych, et al. · Measurement · 12
Changes in the NPL orifice conductance on a transition from molecular gas flow to transitional flow
2009 · Tomáš Gronych, Ladislav Peksa, et al. · Vacuum · 8
Final report on the supplementary comparison Euromet.M.P-S2 (bilateral comparison) in the pressure range from 30 Pa to 7000 Pa
2007 · Karl Jousten, Thomas Bock, et al. · Metrologia · 8
The new method of traceability of a force-balanced piston gauge used as primary vacuum standard
2004 · Jiri Tesar, Petr Repa, et al. · Vacuum · 7
Final report on EURAMET.M.P-K4.2010: Key and supplementary comparison of national pressure standards in the range 1 Pa to 15 kPa of absolute and gauge pressure
2014 · Zdeněk Krajíček, Mercede Bergoglio, et al. · Metrologia · 6
Dynamic extension – A new principle for a vacuum primary standard for UHV-range (10−6–10−10 Pa) calibration of hot cathode ionisation gauges
2011 · L. Peksa, T. Gronych, et al. · Vacuum · 6
An additional uncertainty of the throughput generated by the constant pressure gas flowmeter
2008 · L Peksa, T Gronych, et al. · Journal of Physics Conference Series · 6
PDF
Gravimetric flow standard in the vacuum and hermetic modes
2018 · Martin Vičar, Zdeněk Krajíček, et al. · Measurement Science and Technology · 5
PDF
Determination of pumping speed and its impact on the overall uncertainty budget of the CMI orifice flow standard
2008 · L Peksa, T Gronych, et al. · Metrologia · 4
PDF
Pressure comparison measurements between the CMI and the PTB in the range 0.07 MPa to 0.4 MPa
1999 · J Tesar, Z Krajicek, et al. · Metrologia · 4
A Comparison of Primary Gas Flow Standards Spanning the Range from 10 sccm N2to 10 slm N2
2014 · Casey Rombouts, Michael Bair, et al. · NCSLI Measure · 2
Final report on EURAMET.M.P-S12 — Bilateral supplementary comparison of the national pressure standards of CMI and INRIM in the range 300 Pa to 15 kPa of negative gauge pressure
2014 · Zdenek Krajícek, Mercede Bergoglio, et al. · Metrologia · 2
Comparison of primary pressure standards of METAS and CMI in the range 50–600 kPa
2006 · Christian Wüthrich, Jirí Tesar, et al. · Metrologia · 2
Pneumatic gauge pressure comparison measurements between the UME (Turkey) and the CMI (Czech Republic) EUROMET project No. 537
2001 · M H Orhan, Y Calkin, et al. · Metrologia · 2
PDF
Comparison of primary gas flow standard spanning the range from 2 mL/min to 10 L/min
2022 · Chun-Lin Chiang, John Wright, et al. · Metrologia · 1
Comparison for gas flow range 5 ml/min to 30 l/min (EURAMET.M.FF-S10)
2020 · R Högström, M Heinonen, et al. · Metrologia · 1
Final Report on EUROMET Project 881 / EURAMET.M.P-K7: High pressure comparisons between seven European National Laboratories Range 50 MPa to 500 MPa
2019 · M Rantanen, S Saxholm, et al. · Metrologia · 1
Implementation of multi-opening orifices in the primary metrology of vacuums and small gas throughputs
2013 · L. Peksa, T. Gronych, et al. · Vacuum · 1
Final report on COOMET key comparison of national pressure standards in the range 100 Pa to 5 kPa of gauge pressure (COOMET.M.P-K14)
2011 · H Ahrendt, J Könemann, et al. · Metrologia · 1
Optimization of data storage and backend of Akrmat web application
2026 · Krajíček, Zdeněk · Czech Technical University Digital Library (Czech Technical University in Prague)
Analytical solutions of some model cases of piston-cylinder assemblies
2021 · Dominik Pražák, Tomáš Hajduk, et al. · Measurement Science and Technology
A Comparison of Primary Gas Flow Standards Spanning the Range 10 sccm N2 to 10 slm N2 | NIST
2014 · John Wright, Casey Rombouts, et al.
High pressure comparisons between seven European National Laboratories: Range 50 MPa to 500 MPa
2007 · Markku Rantanen, Sari Semenoja, et al.
The New CMI (Czech Metrology Institute) Method of Metrological Ensure for Accurate Low Mass Flow
2002 · Jiří Tesař, Dominik Pražák, et al. · Analytical Sciences/Supplements Proceedings of IUPAC International Congress on Analytical Sciences 2001 (ICAS 2001)
Works count: 26
Citation count: 94
H-index: 6
I10-index: 2
Year
Topic
Type