Get started
Author

Оleksandr Gutnichenko

Observed names: O. A. Gutnichenko, O. Gutnichenko, Oleksandr Gutnichenko
Institution: Lund University
Observed institution: Lund University
ORCID: 0000-0003-0882-7419
Observed ORCID: 0000-0003-0882-7419
OpenAlex ID: A5035242583
The influence of tool micro-geometry on stress distribution in turning operations of AISI 4140 by FE analysis
2016 · Mathias Agmell, Aylin Ahadi, et al. · The International Journal of Advanced Manufacturing Technology · 58
PDF
Tool wear and machining dynamics when turning high chromium white cast iron with pcBN tools
2017 · Oleksandr Gutnichenko, Volodymyr Bushlya, et al. · Wear · 53
Performance and wear mechanisms of novel superhard diamond and boron nitride based tools in machining Al-SiCp metal matrix composite
2017 · Volodymyr Bushlya, Filip Lenrick, et al. · Wear · 52
PDF
Investigation of mechanical and thermal loads in pcBN tooling during machining of Inconel 718
2020 · Mathias Agmell, Volodymyr Bushlya, et al. · The International Journal of Advanced Manufacturing Technology · 40
PDF
Heat flux in metal cutting: Experiment, model, and comparative analysis
2018 · V. Kryzhanivskyy, V. Bushlya, et al. · International Journal of Machine Tools and Manufacture · 39
Tool wear and tool life of PCBN, binderless cBN and wBN-cBN tools in continuous finish hard turning of cold work tool steel
2014 · V. M. Bushlya, O. A. Gutnichenko, et al. · Journal of Superhard Materials · 38
Influence of GnP additive to vegetable oil on machining performance when MQL-assisted turning Alloy 718
2018 · Oleksandr Gutnichenko, Volodymyr Bushlya, et al. · Procedia Manufacturing · 37
PDF
Effects of Cutting Speed When Turning Age Hardenedinconel 718with Pcbn Tools of Binderless and Low-cbn Grades
2013 · Volodymyr Bushlya, Oleksandr Gutnichenko, et al. · Machining Science and Technology · 36
Sintering of binderless cubic boron nitride and its modification by β-Si3N4 additive for hard machining applications
2019 · V. Bushlya, I. Petrusha, et al. · International Journal of Refractory Metals and Hard Materials · 27
Improvement of tool utilization when hard turning with cBN tools at varying process parameters
2021 · O. Gutnichenko, M. Nilsson, et al. · Wear · 18
PDF
Modelling and Experimental Investigation of Cutting Temperature when Rough Turning Hardened Tool Steel with PCBN Tools
2015 · V. Kryzhanivskyy, V. Bushlya, et al. · Procedia CIRP · 18
Performance assessment of pCBN and bCBN tools in machining of high-chromium white cast iron
2015 · Ling Chen, Jinming Zhou, et al. · The International Journal of Advanced Manufacturing Technology · 17
Influence of graphite nanoadditives to vegetable-based oil on machining performance when MQCL assisted hard turning
2018 · Oleksandr Gutnichenko, Volodymyr Bushlya, et al. · Procedia CIRP · 14
PDF
Minimum quantity lubrication (MQL) with carbon nanostructured additives in sheet metal forming
2018 · Lanny Kirkhorn, Oleksandr Gutnichenko, et al. · Procedia Manufacturing · 11
PDF
Computational and Experimental Inverse Problem Approach for Determination of Time Dependency of Heat Flux in Metal Cutting
2017 · V. Kryzhanivskyy, V. Bushlya, et al. · Procedia CIRP · 11
PDF
On the Analytical Representation of Chip Area and Tool Geometry when Oblique Turning with Round Tools. Part 1: Chip Area Parameters Under Variation of Side and Back Rake Angle
2015 · V. Bushlya, F. Schultheiss, et al. · Procedia CIRP · 10
PDF
Evolution of magnetic properties during tempering
2021 · Ville Akujärvi, Tord Cedell, et al. · The International Journal of Advanced Manufacturing Technology · 9
PDF
Performance and wear mechanisms of TiAlN-NbN coated cemented carbide in milling Ti6Al4V with different cooling and lubrication approaches
2025 · Rebecka Lindvall, Josu Casas Gayubo, et al. · Wear · 8
Wear mechanisms in Ti(C,N)-Al2O3 coated carbide during sustainable machining CGI
2023 · Rebecka Lindvall, Kevin Monroe Diaz, et al. · International Journal of Refractory Metals and Hard Materials · 8
Influence of tool material and tool wear on tool temperature in hard turning reconstructed via inverse problem solution
2017 · V. Kryzhanivskyy, V. Bushlya, et al. · Journal of Superhard Materials · 8
Tool Wear and Vibrations Generated When Turning High-chromium White Cast Iron with pCBN Tools
2016 · O. Gutnichenko, V. Bushlya, et al. · Procedia CIRP · 7
PDF
Analysis and Monitoring the Initial Tool Damage and Coating Failure when Hard Milling Vanadis 4E with TiAlN Coated PcBN
2025 · Oleksandr Gutnichenko, Sandra Gordon Pozuelo, et al. · Procedia CIRP · 6
Modeling of Force Build-up Process and Optimization of Tool Geometry when Intermittent Turning
2017 · O. Gutnichenko, A. Agic, et al. · Procedia CIRP · 5
PDF
Influence of Cutting Edge Geometry on Force Build-up Process in Intermittent Turning
2016 · A. Agic, O. Gutnichenko, et al. · Procedia CIRP · 5
PDF
On the Analytical Representation of Chip Area and Tool Geometry when Oblique Turning with Round Tools. Part 2: Variation of Tool Geometry Along the Edge Line
2015 · V. Bushlya, F. Schultheiss, et al. · Procedia CIRP · 4
PDF
Works count: 44
Citation count: 546
H-index: 13
I10-index: 16
Year
Topic
Type