Get started
Author

Thomas M. Grupp

Observed names: Grupp, Thomas, Grupp, Thomas M, Grupp, Thomas M., Grupp, Thomas Michael, T Grupp, T. Grupp, T. M. Grupp, T.M. Grupp, TM Grupp, Thomas Grupp, Thomas M Grupp, Thomas Michael Grupp
Observed institutions: LMU Klinikum, B. Braun (Germany), Aesculap (United States), Klinik und Poliklinik für Orthopädie, Physikalische Medizin und Rehabilitation, Institut für Muskuloskelettale Medizin, University of Duisburg-Essen, Ludwig-Maximilians-Universität München, Hamburg University of Technology, University of Bologna
ORCID: 0000-0002-1068-7497
Observed ORCID: 0000-0002-1068-7497
OpenAlex ID: A5040495944
Modular titanium alloy neck adapter failures in hip replacement - failure mode analysis and influence of implant material
2010 · Thomas M Grupp, Thomas Weik, et al. · BMC Musculoskeletal Disorders · 246
PDF
Influence of material coupling and assembly condition on the magnitude of micromotion at the stem–neck interface of a modular hip endoprosthesis
2011 · S.Y. Jauch, G. Huber, et al. · Journal of Biomechanics · 126
Inflammatory response against different carbon fiber-reinforced PEEK wear particles compared with UHMWPE in vivo
2010 · Sandra Utzschneider, Fabian Becker, et al. · Acta Biomaterialia · 100
The effect of design parameters of dynamic pedicle screw systems on kinematics and load bearing: an in vitro study
2010 · C. Schilling, S. Krüger, et al. · European Spine Journal · 98
PDF
Alternative bearing materials for intervertebral disc arthroplasty
2009 · Thomas M. Grupp, Hans-J. Meisel, et al. · Biomaterials · 91
Biomaterial Hypersensitivity: Is It Real? Supportive Evidence and Approach Considerations for Metal Allergic Patients following Total Knee Arthroplasty
2015 · Andrew J. Mitchelson, Craig J. Wilson, et al. · BioMed Research International · 82
PDF
Acrylic bone cement in total joint arthroplasty: A review
2016 · Khaled J. Saleh, Mouhanad M. El Othmani, et al. · Journal of Orthopaedic Research® · 79
PDF
The influence of contact conditions and micromotions on the fretting behavior of modular titanium alloy taper connections
2012 · M. Baxmann, S.Y. Jauch, et al. · Medical Engineering & Physics · 78
Biotribology of a vitamin E-stabilized polyethylene for hip arthroplasty – Influence of artificial ageing and third-body particles on wear
2014 · Thomas M. Grupp, Melanie Holderied, et al. · Acta Biomaterialia · 68
Biotribology of alternative bearing materials for unicompartmental knee arthroplasty
2010 · Thomas M. Grupp, Sandra Utzschneider, et al. · Acta Biomaterialia · 68
Fixed and mobile bearing total knee arthroplasty – Influence on wear generation, corresponding wear areas, knee kinematics and particle composition
2009 · T.M. Grupp, C. Kaddick, et al. · Clinical Biomechanics · 68
Biotribological evaluation of artificial disc arthroplasty devices: influence of loading and kinematic patterns during in vitro wear simulation
2008 · Thomas M. Grupp, James J. Yue, et al. · European Spine Journal · 57
PDF
Definition and evaluation of testing scenarios for knee wear simulation under conditions of highly demanding daily activities
2012 · Jens Schwiesau, Carolin Schilling, et al. · Medical Engineering & Physics · 52
Biotribology of a new bearing material combination in a rotating hinge knee articulation
2013 · T.M. Grupp, A. Giurea, et al. · Acta Biomaterialia · 50
Präklinische Ergebnisse beschichteter Knieimplantate für Allergiker
2010 · J. Reich, L. Hovy, et al. · Der Orthopäde · 50
Micromotions at the taper interface between stem and neck adapter of a bimodular hip prosthesis during activities of daily living
2013 · Sabrina Yvonne Jauch, Gerd Huber, et al. · Journal of Orthopaedic Research® · 49
PDF
Vitamin E stabilised polyethylene for total knee arthroplasty evaluated under highly demanding activities wear simulation
2016 · Thomas M. Grupp, Bernhard Fritz, et al. · Acta Biomaterialia · 45
Increased long-term failure risk associated with excessively thin cement mantle in cemented hip arthroplasty: A comparative in vitro study
2007 · Luca Cristofolini, Paolo Erani, et al. · Clinical Biomechanics · 43
Two column lesions in the thoracolumbar junction: anterior, posterior or combined approach? A comparative biomechanical in vitro investigation
2006 · Tibor Bence, Ulrich Schreiber, et al. · European Spine Journal · 40
PDF
Metal ion release barrier function and biotribological evaluation of a zirconium nitride multilayer coated knee implant under highly demanding activities wear simulation
2018 · Ana Laura Puente Reyna, Bernhard Fritz, et al. · Journal of Biomechanics · 39
Is a single anterolateral screw-plate fixation sufficient for the treatment of spinal fractures in the thoracolumbar junction? A Biomechanical in vitro Investigation
2004 · Ulrich Schreiber, Tibor Bence, et al. · European Spine Journal · 39
Method for quantitative assessment of acetabular bone defects
2018 · Georg Hettich, Ronja A. Schierjott, et al. · Journal of Orthopaedic Research® · 36
PDF
Patient-Specific Finite Element Models of Posterior Pedicle Screw Fixation: Effect of Screw’s Size and Geometry
2021 · Marco Sensale, Tanguy Vendeuvre, et al. · Frontiers in Bioengineering and Biotechnology · 35
PDF
Elevated cytokine expression of different PEEK wear particles compared to UHMWPE in vivo
2013 · V. Lorber, A. C. Paulus, et al. · Journal of Materials Science Materials in Medicine · 35
Musculoskeletal Multibody Simulation Analysis on the Impact of Patellar Component Design and Positioning on Joint Dynamics after Unconstrained Total Knee Arthroplasty
2020 · Maeruan Kebbach, Martin Darowski, et al. · Materials · 33
PDF
Works count: 206
Citation count: 2,714
H-index: 29
I10-index: 68
Year
Topic
Type