Get started
Author

Natalia S. Hrudkina

Observed names: N.S. Hrudkina, Natali Hrudkina, Natalia Hrudkina, Наталія Сергіївна Грудкіна
ORCID: 0000-0002-0914-8875
Observed ORCID: 0000-0002-0914-8875
OpenAlex ID: A5042495161
Predicting the shape formation of hollow parts with a flange in the process of combined radial-reverse extrusion
2020 · Natalia Hrudkina, Leila Aliieva, et al. · Eastern-European Journal of Enterprise Technologies · 50
PDF
Mathematical and computer simulation for the appearance of dimple defect by cold combined extrusion
2022 · Natalia Hrudkina, Oleg Markov, et al. · FME Transaction · 35
PDF
Investigating the process of shrinkage depression formation at the combined radial-backward extrusion of parts with a flange
2019 · Natalia Hrudkina, Leila Aliieva, et al. · Eastern-European Journal of Enterprise Technologies · 32
PDF
Effect of the tool geometry on the force mode of the combined radial-direct extrusion with compression
2020 · Leila Aliieva, Natalia Hrudkina, et al. · Eastern-European Journal of Enterprise Technologies · 31
PDF
Investigation of new method of large ingots forging based on upsetting of workpieces with ledges
2022 · Oleg E. Markov, Anton S. Khvashchynskyi, et al. · The International Journal of Advanced Manufacturing Technology · 30
Control Systems for the Temperature Field During Drawing, Taking into Account the Dynamic Modes of the Technological Installation
2022 · Oksana Khrebtova, Oleksandr Shapoval, et al. · IEEE International Conference on Modern Electrical and Energy System (MEES) · 27
Improving the quality of forgings based on upsetting the workpieces with concave facets
2018 · Oleg Markov, Vitalii Zlygoriev, et al. · Eastern-European Journal of Enterprise Technologies · 27
PDF
Modeling of cold extrusion processes using kinematic trapezoidal modules
2020 · Natalia Hrudkina, Leila Aliieva · FME Transaction · 24
PDF
Process modeling of sequential radial-direct extrusion using curved triangular kinematic module
2020 · Natalia Hrudkina · FME Transaction · 17
PDF
Development of calculation schemes for the combined extrusion to predict the shape formation of axisymmetric parts with a flange
2018 · Kateryna Vlasenko, Natalia Hrudkina, et al. · Eastern-European Journal of Enterprise Technologies · 15
PDF
Derivation of engineering formulas in order to calculate energy-power parameters and a shape change in a semi-finished product in the process of combined extrusion
2019 · Natalia Hrudkina, Leila Aliieva, et al. · Eastern-European Journal of Enterprise Technologies · 14
PDF
Modeling the process of radial-direct extrusion with expansion using a triangular kinematic module
2020 · Natalia Hrudkina, Leila Aliieva, et al. · Eastern-European Journal of Enterprise Technologies · 11
PDF
Selecting a cutting method for workpieces before stamping using synergetic fracture criteria and a deformability limit determination technique for separating processes
2023 · Sergii G. Karnaukh, Oleg E. Markov, et al. · The International Journal of Advanced Manufacturing Technology · 9
Analysis of power parameters of combined three-direction deformation of parts with flange
2021 · Leila Aliieva, Oleg Markov, et al. · FME Transaction · 8
PDF
Designing a kinematic module with rounding to model the processes of combined radial-longitudinal extrusion involving a tool whose configuration is complex
2021 · Natalia Hrudkina, Igramotdin Aliiev, et al. · Eastern-European Journal of Enterprise Technologies · 7
PDF
Optimization of Informative Signals Stability Along the Waveguides
2021 · Iurii Savchenko, Oleksandr Shapoval, et al. · IEEE International Conference on Modern Electrical and Energy System (MEES) · 6
Investigation of hot combined extrusion of steel hollow conical parts
2024 · Vladymyr L. Kalyuzhnyi, Oleg E. Markov, et al. · Journal of the Brazilian Society of Mechanical Sciences and Engineering · 5
Testing a new technique for producing artillery cartridge cases from pipe workpiece by roughing with a friction tool
2023 · Oleg Markov, Serhii Shevtsov, et al. · Eastern-European Journal of Enterprise Technologies · 4
PDF
Predicting the shape formation of parts with a flange and an axial protrusion in the process of combined aligned radial-direct extrusion
2020 · Natalia Hrudkina, Leila Aliieva, et al. · Eastern-European Journal of Enterprise Technologies · 4
PDF
Influence of Welding Current and Electric Butt-Welding of Strip Conditions on the U-Channel Section Strength After Roll-Forming
2023 · Volodymyr Kukhar, Khrystyna Malii, et al. · IEEE International Conference on Modern Electrical and Energy System (MEES) · 2
Test Quality Assessment and Adaptive Algorithm Based on IRT Models
2021 · Alexander Kostikov, Kateryna Vlasenko, et al. · Symposium on Advances in Educational Technology (AET) · 2
Technological and Chemical Drivers of Zinc Coating Degradation in DX51d+Z140 Cold-Formed Steel Sections
2026 · Volodymyr Kukhar, Andrii Kostryzhev, et al. · Metals · 1
PDF
Комп’ютерне Та Чисельне Моделювання Термомеханічного Стану Біметалевих Конструктивних Елементів
2025 · Денис Юрійович Міхєєнко, Наталія Сергіївна Грудкіна, et al. · Naukovij žurnal Metìnvest polìtehnìki. Serìâ: Tehnìčnì nauki. · 1
PDF
Designing optimal geometry of the radius die for broaching cases
2024 · Oleg Markov, Volodymyr Zinskyi, et al. · Eastern-European Journal of Enterprise Technologies · 1
PDF
Computer Modelling of Pipe Straightening Process on a Six-Roller Cross-Roll Machine
2023 · Eduard Gribkov, Yuriy Dobronosov, et al. · IEEE International Conference on Computer Sciences and Information Technologies (CSIT) · 1
Works count: 37
Citation count: 366
H-index: 11
I10-index: 12
Year
Topic
Type