Get started
Author

Yusuf Ziya Erdil

Observed names: ERDİL, Yusuf Ziya, Erdil, Y. Z., Y.Z. Erdil, YUSUF ZIYA ERDIL, Yusuf Z Erdil, Yusuf Z. Erdil, Yusuf Ziya ERDİL, Ziya Erdil, Yusuf
Institution: Muğla University
ORCID: 0000-0003-3938-2168
Observed ORCID: 0000-0003-3938-2168
OpenAlex ID: A5044580415
Bending moment capacity of rectangular mortise and tenon furniture joints
2005 · Yusuf Ziya Erdil, Ali Kasal, et al. · Forest Products Journal · 63
Numerical Analyses of Various Sizes of Mortise and Tenon Furniture Joints
2016 · Ali Kasal, Jerzy Smardzewski, et al. · BioResources · 59
The State of the Art of Biomechanics Applied in Ergonomic Furniture Design
2023 · Yan Liu, Wengang Hu, et al. · Applied Sciences · 47
PDF
Effect of Tenon Geometry, Grain Orientation, and Shoulder on Bending Moment Capacity and Moment Rotation Characteristics of Mortise and Tenon Joints
2012 · Erkan Likos, Eva Haviarová, et al. · Wood and Fiber Science (Society of Wood Science and Technology) · 38
PDF
Bending Moment Capacities of L-Shaped Mortise and Tenon Joints under Compression and Tension Loadings
2015 · Ali Kasal, Carl Albert Eckelman, et al. · BioResources · 30
Investigating the Use of Vine Pruning Stalks (vitis Vinifera L. Cv. Sultani) as Raw Material for Particleboard Manufacturing
2014 · Mehmet Yeni̇ocak, Yusuf Ziya Erdil, et al. · 26
Estimation equations for moment resistances of L-type screw corner joints in case goods furniture
2008 · Ali Kasal, Yusuf Ziya Erdil, et al. · Forest Products Journal · 23
Staple holding strength of furniture frame joints constructed of plywood and oriented strandboard
2003 · Yusuf Ziya Erdil, J Zhang, et al. · Forest Products Journal · 23
Utilizing Poppy Husk-based Particleboards as an Alternative Material in Case Furniture Construction
2016 · Mustafa Küçüktüvek, Ali Kasal, et al. · BioResources · 22
Lateral holding strength of dowel joints constructed of plywood and oriented strandboard
2002 · Jilei Zhang, Yusuf Ziya Erdil, et al. · Forest Products Journal · 17
Effect of Adhesive Type and Tenon Size on Bending Moment Capacity and Rigidity of T-shaped Furniture Joints Constructed of Turkish Beech and Scots Pine
2013 · Ali Kasal, Eva Haviarová, et al. · Wood and Fiber Science (Society of Wood Science and Technology) · 16
PDF
Withdrawal Strength of Dowels in Plywood and Oriented Strand Board
2001 · Yusuf Ziya Erdil, C. A. Eckelman · DergiPark (Istanbul University) · 16
Withdrawal force capacity of T-type furniture joints constructed from various heat-treated wood species
2017 · Harun Diler, Mehmet Acar, et al. · BioResources · 15
PDF
Moment capacity of traditional and alternative T-type end-to-side-grain furniture joints
2005 · Hasan Efe, Jilei Zhang, et al. · Forest Products Journal · 15
Withdrawal and bending strength of dowel-nuts in plywood and oriented strandboard
2003 · Yusuf Ziya Erdil, Jilei Zhang, et al. · Forest Products Journal · 15
Design and testing of wood school desk frames suitable for production by low technology methods from waste wood residues
2001 · Eva Haviarová, C. A. Eckelman, et al. · Forest Products Journal · 15
Effect of shoulders on bending moment capacity of round mortise and tenon joints
2006 · C. A. Eckelman, Yusuf Ziya Erdil, et al. · Muğla Sıtkı Koçman University Institutional Repository · 14
Improvement of technological properties of wood plastic composites reinforced with glass and carbon fibre fabric
2021 · Sefa Durmaz, Yusuf Z Erdil, et al. · Polymers and Polymer Composites · 13
Relationship between static and cyclic front to back load capacity of wooden chairs and evaluation of the strength values according to acceptable design values
2018 · Tolga Kuskun, Ali Kasal, et al. · Wood and Fiber Science · 13
Effect of Tenon Size on Static Front to Back Loading Performance of Wooden Chairs in Comparison with Acceptable Design Loads
2017 · Halil Kılıç, Ali Kasal, et al. · BioResources · 13
Static Front to Back Loading Capacity of Wood Chairs and Relationship between Chair Strength and Individual Joint Strength
2016 · Ali Kasal, Tolga Kuşkun, et al. · BioResources · 13
Comparison of mechanical properties of solid wood and laminated veneer lumber fabricated from Turkish beech, Scotch pine, and Lombardy poplar
2009 · Yusuf Ziya Erdil, Ali Kasal, et al. · Forest Products Journal · 12
Moment resistance of multiscrew L-type corner joints.
2005 · Jilei Zhang, Hasan Efe, et al. · Forest Products Journal · 12
Bending moment capacity of round mortise and tenon furniture joints
2004 · C. A. Eckelman, Eva Haviarová, et al. · Muğla Sıtkı Koçman University Institutional Repository · 12
Bending moment resistances of L-shaped furniture frame joints under tension and compression loadings.
2020 · SELÇUK DEMIRCI, HARUN DILER, et al. · Wood Research · 11
PDF
Works count: 73
Citation count: 712
H-index: 15
I10-index: 28
Year
Topic
Type