Get started
Author

Kaan Bilge

Observed names: Bilge, Kaan, BİLGE, Kaan, Bİlge, Kaan, K. Bilge, Kaan Bilge, Kaan BİLGE
ORCID: 0000-0002-7815-5948
Observed ORCID: 0000-0002-7815-5948
OpenAlex ID: A5045708359
Preparation of high surface area activated carbon from waste-biomass of sunflower piths: Kinetics and equilibrium studies on the dye removal
2018 · Mustafa Baysal, Kaan Bilge, et al. · Journal of environmental chemical engineering · 180
Structural composites hybridized with epoxy compatible polymer/MWCNT nanofibrous interlayers
2012 · K. Bilge, E. Ozden-Yenigun, et al. · Composites Science and Technology · 63
PDF
Global and local nanofibrous interlayer toughened composites for higher in-plane strength
2013 · K. Bilge, S. Venkataraman, et al. · Composites Part A Applied Science and Manufacturing · 49
High-Performance Green Composites of Poly(lactic acid) and Waste Cellulose Fibers Prepared by High-Shear Thermokinetic Mixing
2017 · Oguzhan Oguz, Kaan Bilge, et al. · Industrial & Engineering Chemistry Research · 24
High strain rate response of nanofiber interlayered structural composites
2017 · Elif Özden-Yenigün, Kaan Bilge, et al. · Composite Structures · 22
PDF
Interlayer toughening mechanisms of composite materials
2015 · K. Bilge, M. Papila · Elsevier eBooks · 22
Synergistic role of in-situ crosslinkable electrospun nanofiber/epoxy nanocomposite interlayers for superior laminated composites
2017 · Kaan Bilge, Yelda Yorulmaz, et al. · Composites Science and Technology · 21
Hybrid green composites of PLA incorporated with upcycled waste cellulose and vermiculite
2023 · Gizem Ariturk, Cagla Girisken, et al. · European Polymer Journal · 20
Catalytic synthesis of boron nitride nanotubes at low temperatures
2018 · Mustafa Baysal, Kaan Bilge, et al. · Nanoscale · 16
Blends of highly branched and linear poly(arylene ether sulfone)s: Multiscale effect of the degree of branching on the morphology and mechanical properties
2019 · E. Billur Sevinis Ozbulut, Senem Seven, et al. · Polymer · 12
Designed-in Molecular Interactions Lead to Superior Thermo-mechanical Properties in Nanocomposites
2011 · E. Ozden, A.R. Atilgan, et al. · MRS Proceedings · 10
Morphological adaptation of expanded vermiculite in polylactic acid and polypropylene matrices for superior thermoplastic composites
2024 · Gizem Ariturk, Kaan Bilge, et al. · Polymer Composites · 9
PDF
Poly(propylene)/waste vulcanized ethylene- propylene-diene monomer (PP/WEPDM) blends prepared by high-shear thermo-kinetic mixer
2017 · Eren Simsek, Oguzhan Oguz, et al. · Journal of Elastomers & Plastics · 8
Stabilized electrospinning of heat stimuli/in situ crosslinkable nanofibers and their self‐same nanocomposites
2016 · Kaan Bilge, Ayça Ürkmez, et al. · Journal of Applied Polymer Science · 8
Tensile failure mechanisms in additively manufactured brittle/ductile UV-curable resins and their nanocomposites with superior strength
2025 · Kaan Bilge, Ayberk Baykal, et al. · Progress in Additive Manufacturing · 6
A comparative fractographic analysis for the effect of polymeric nanofiber reinforcements on the tensile behavior of multi‐layered epoxy nanocomposites
2025 · Kaan Bilge, F. Javanshour, et al. · Polymer Engineering and Science · 6
Challenges in Micro-CT Characterization of Composites
2019 · Güllü Kiziltaş, Melih Papila, et al. · Springer eBooks · 6
Fractographic Investigation of Cryogenic Temperature Mode-II Delamination Behavior of Filament Wound CFRP Laminates with Varied Resin Systems
2023 · Recep Ufuk, Kaan Bilge, et al. · Journal of Composites Science · 5
PDF
Sound-tracking of failure events in cross-ply composite laminates under tension
2016 · K. Bilge, B. Yilmaz, et al. · Composite Structures · 5
Grid-by-Grid Fractographic Analysis of Additively Manufactured UV-Cured Resins for Pre-programmable Failure
2024 · Kaan Bilge · Journal of Failure Analysis and Prevention · 3
One-step preparation of silver nanoparticle containing polymer nanocomposites via stereolithography technique
2024 · Ayberk BAYKAL, Onur Alp AKSAN, et al. · Journal of Innovative Engineering and Natural Science · 3
Selection Criteria for Tackifier Addition to Paraffin Wax based Hybrid Rocket Fuels
2019 · Kaan Bilge, Ugur Kokal, et al. · AIAA Propulsion and Energy Forum · 3
Low Density Polypropylene/Waste Cellulose Fiber Composites by High-Shear Thermo-Kinetic Mixer
2017 · O. Oguz, E. Simsek, et al. · International Polymer Processing · 3
Multi-scale nature of composite materials: three case studies
2012 · Kaan Bilge · Sabanci University · 3
Effects of Nanofiber Interleaving on the Strength and Failure Behavior of Co-Cured Composite Joints with Fiber Orientation Mismatch
2025 · Abdul Bari Abdul Raheman, Kaan Bilge, et al. · Journal of Composites Science · 2
PDF
Works count: 62
Citation count: 514
H-index: 10
I10-index: 11
Year
Topic
Type