Get started
Author

Sture Hogmark

Observed names: S Hogmark, S. Hogmark, Sture HOGMARK
Institution: Uppsala University
ORCID: 0000-0001-6278-8487
Observed ORCID: 0000-0001-6278-8487
OpenAlex ID: A5047522018
Hardness measurements of thin films
1984 · B. Jönsson, S. Hogmark · Thin Solid Films · 749
Design and evaluation of tribological coatings
2000 · Sture Hogmark, Staffan Jacobson, et al. · Wear · 437
Thermal fatigue cracking of surface engineered hot work tool steels
2004 · Anders Persson, Sture Hogmark, et al. · Surface and Coatings Technology · 217
Influence of residual stresses on fracture and delamination of thin hard coatings
1999 · U Wiklund, J Gunnars, et al. · Wear · 193
Mechanical and tribological properties of multilayered PVD TiN/CrN, TiN/MoN, TiN/NbN and TiN/TaN coatings on cemented carbide
1998 · M. Nordin, M. Larsson, et al. · Surface and Coatings Technology · 174
Residual stresses in TiN, DLC and MoS2 coated surfaces with regard to their tribological fracture behaviour
2009 · Kenneth Holmberg, Helena Ronkainen, et al. · Wear · 157
Influence of surface roughness and coating type on the galling properties of coated forming tool steel
2004 · B. Podgornik, S. Hogmark, et al. · Surface and Coatings Technology · 150
Low stress TiB2 coatings with improved tribological properties
2001 · M Berger, L Karlsson, et al. · Thin Solid Films · 133
Surface modification to improve friction and galling properties of forming tools
2006 · B. Podgornik, S. Hogmark · Journal of Materials Processing Technology · 125
Evaluation of magnetron-sputtered TiB2 intended for tribological applications
2000 · Mattias Berger, Mats Larsson, et al. · Surface and Coatings Technology · 124
DLC coating of boundary lubricated components—advantages of coating one of the contact surfaces rather than both or none
2003 · B Podgornik, S Jacobson, et al. · Tribology International · 122
Influence of hardness of the counterbody in three-body abrasive wear — an overlooked hardness effect
1994 · N. Axén, S. Jacobson, et al. · Tribology International · 115
On the wear of aluminium and magnesium metal matrix composites
1993 · A. Alahelisten, F. Bergman, et al. · Wear · 115
Comparison between different test methods for evaluation of galling properties of surface engineered tool surfaces
2004 · B. Podgornik, S. Hogmark, et al. · Wear · 114
Tribological properties of plasma nitrided and hard coated AISI 4140 steel
2001 · B Podgornik, J Vižintin, et al. · Wear · 114
Mechanical and tribological properties of multilayered PVD TiN/CrN
1999 · Maria Nordin, Mats Larsson, et al. · Wear · 106
Erosion classification of materials using a centrifugal erosion tester
1981 · S. Söderberg, S. Hogmark, et al. · Tribology International · 105
How TiN coatings improve the performance of high speed steel cutting tools
1990 · Per Hedenqvist, Mikael Olsson, et al. · Surface and Coatings Technology · 99
Proper coating selection for improved galling performance of forming tool steel
2005 · B. Podgornik, S. Hogmark, et al. · Wear · 98
Multilayer cracking resistance in bending
1997 · Urban Wiklund, Per Hedenqvist, et al. · Surface and Coatings Technology · 97
Effect of temperature on friction and galling of laser processed Norem 02 and Stellite 21
2003 · D.H.E Persson, S Jacobson, et al. · Wear · 94
Simulation of cutting tool wear by a modified pin-on-disc test
1989 · Mikael Olsson, Staffan Söderberg, et al. · International Journal of Machine Tools and Manufacture · 94
Cracking resistance of thin hard coatings estimated by four-point bending
1997 · Urban Wiklund, Michael Bromark, et al. · Surface and Coatings Technology · 93
Deposition and mechanical properties of multilayered PVD Ti_TiN coatings
1995 · Mats Larsson, Michael Bromark, et al. · Surface and Coatings Technology · 92
Wear of surface treated dies for aluminium extrusion — a case study
2001 · Thomas Björk, Richard Westergård, et al. · Wear · 91
Works count: 256
Citation count: 9,462
H-index: 58
I10-index: 150
Year
Topic
Type