Get started
Author

Riad Khettabi

Prediction of machining performance using RSM and ANN models in hard turning of martensitic stainless steel AISI 420
2019 · Abderrahmen Zerti, Mohamed Athmane Yallese, et al. · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · 90
Investigation of the performance of the MQL, dry, and wet turning by response surface methodology (RSM) and artificial neural network (ANN)
2017 · Mourad Nouioua, Mohamed Athmane Yallese, et al. · The International Journal of Advanced Manufacturing Technology · 88
Machining and Machinability of Aluminum Alloys
2011 · V. Songmene, R. Khettabi, et al. · InTech eBooks · 83
PDF
Design optimization for minimum technological parameters when dry turning of AISI D3 steel using Taguchi method
2016 · Oussama Zerti, Mohamed Athmane Yallese, et al. · The International Journal of Advanced Manufacturing Technology · 72
Effect of MQL and dry processes on the particle emission and part quality during milling of aluminum alloys
2017 · Riad Khettabi, Mourad Nouioua, et al. · The International Journal of Advanced Manufacturing Technology · 54
Cutting Conditions Modeling and Optimization in Hard Turning Using RSM, ANN and Desirability Function
2018 · Abderrezak Labidi, Hamid Tebassi, et al. · Journal of Failure Analysis and Prevention · 46
Effect of tool lead angle and chip formation mode on dust emission in dry cutting
2007 · R. Khettabi, V. Songmene, et al. · Journal of Materials Processing Technology · 44
Comparative assessment of cooling conditions, including MQL technology on machining factors in an environmentally friendly approach
2017 · Mourad Nouioua, Mohamed Athmane Yallese, et al. · The International Journal of Advanced Manufacturing Technology · 39
Fine and Ultrafine Particle Characterization and Modeling in High-Speed Milling of 6061-T6 Aluminum Alloy
2008 · Imed Zaghbani, Victor Songmene, et al. · Journal of Materials Engineering and Performance · 32
Multi-objective optimization of surface roughness, cutting forces, productivity and Power consumption when turning of Inconel 718
2015 · Hamid Tebassi, Mohamed Athmane Yallese, et al. · International Journal of Industrial Engineering Computations · 28
PDF
Modeling of Particle Emission During Dry Orthogonal Cutting
2009 · Riad Khettabi, Victor Songmene, et al. · Journal of Materials Engineering and Performance · 26
Effects of Speeds, Materials, and Tool Rake Angles on Metallic Particle Emission During Orthogonal Cutting
2009 · Riad Khettabi, Victor Songmene, et al. · Journal of Materials Engineering and Performance · 24
On the micro and nanoparticle emission during machining of titanium and aluminum alloys
2013 · R. Khettabi, L. Fatmi, et al. · CIRP journal of manufacturing science and technology · 23
Dry high-speed machining: a cost effective and green process
2012 · Victor Songmene, Riad Khettabi, et al. · International Journal of Manufacturing Research · 21
Multi-response optimization using artificial neural network-based GWO algorithm for high machining performance with minimum quantity lubrication
2021 · Mourad Nouioua, Aissa Laouissi, et al. · The International Journal of Advanced Manufacturing Technology · 20
Microstructure and crystallographic properties of Cu77Zn21alloy under the effect of heat treatment
2018 · Laidi Babouri, Kamel Belmokre, et al. · Materials at High Temperatures · 19
Effect of Friction Testing of Metals on Particle Emission
2011 · J. Kouam, V. Songmene, et al. · Journal of Materials Engineering and Performance · 16
Understanding the formation of nano and micro particles during metal cutting
2008 · Riad Khettabi, Victor Songmené, et al. · Espace ÉTS (ETS) · 15
Modeling and Optimization of Cutting Parameters during Machining of Austenitic Stainless Steel AISI304 Using RSM and Desirability Approach
2020 · Septi Boucherit, Sofiane Berkani, et al. · Periodica Polytechnica Mechanical Engineering · 14
Experimental study of a turbo-alternator in industrial environment using cyclostationarity analysis
2015 · Tarek Kebabsa, Nouredine Ouelaa, et al. · The International Journal of Advanced Manufacturing Technology · 13
On Chip Formation During Drilling of Cast Aluminum Alloys
2013 · Jules Kouam, Victor Songmene, et al. · Machining Science and Technology · 12
Optimization of Machining Process During Turning of X210Cr12 Steel Under MQL Cooling as a Key Factor in Clean Production
2017 · M. Nouioua, M. A. Yallese, et al. · Lecture notes in mechanical engineering · 9
Erratum to: Machinability and Machining of Titanium Alloys: A Review
2014 · Seyed Ali Niknam, Riad Khettabi, et al. · Materials forming, machining and tribology · 7
Particle emission during orthogonal and oblique cutting
2009 · Riad Khettabi, Victor Songmené · Espace ÉTS (ETS) · 6
Nanoparticle measurement, control and characterization: procedure applied to machining and mechanical friction
2015 · Victor Songmené, Riad Khettabi, et al. · Espace ÉTS (ETS) · 4
Works count: 59
Citation count: 825
H-index: 16
I10-index: 21
Year
Topic
Type