Author

Brian Gabbitas

Observed names: B GABBITAS, B Gabbitas, B L Gabbitas, B L Gabbitas*, B. GABBITAS, B. Gabbitas, B. L. GABBITAS, B. L. Gabbitas, B.L. Gabbitas, BRIAN GABBITAS, BRIAN GABBITTAS, Gabbitas, Brian Leslie

Institution: University of Waikato

Observed institutions: University of New Brunswick, London South Bank University, University of Waikato

ORCID: 0000-0002-4334-0764

Observed ORCID: 0000-0002-4334-0764

OpenAlex ID: A5079401686

A novel Ti–6Al–4V alloy microstructure with very high strength and good ductility

2015 · M.T. Jia, D.L. Zhang, et al. · Scripta Materialia · 100

Development and Design of Binder Systems for Titanium Metal Injection Molding: An Overview

2012 · Guian Wen, Peng Cao, et al. · Metallurgical and Materials Transactions A · 90

Feasibility of producing Ti-6Al-4V alloy for engineering application by powder compact extrusion of blended elemental powder mixtures

2016 · Fei Yang, Brian Gabbitas · Journal of Alloys and Compounds · 50

Evaluation of reactive induction sintering as a manufacturing route for blended elemental Ti-5Al-2.5Fe alloy

2018 · M.T. Jia, B. Gabbitas, et al. · Journal of Materials Processing Technology · 46

PDF

Synthesis of a TiBw/Ti6Al4V composite by powder compact extrusion using a blended powder mixture

2014 · Huiyang Lu, Deliang Zhang, et al. · Journal of Alloys and Compounds · 44

Fatigue Life Evaluation of a Railway Vehicle Bogie Using an Integrated Dynamic Simulation

1994 · R K Luo, B L Gabbitas, et al. · Proceedings of the Institution of Mechanical Engineers Part F Journal of Rail and Rapid Transit · 44

Porosity, Microstructure, and Mechanical Properties of Ti-6Al-4V Alloy Parts Fabricated by Powder Compact Forging

2017 · Mingtu Jia, Deliang Zhang, et al. · Metallurgical and Materials Transactions A · 37

Synthesis of an ultrafine grained TiAl based alloy by subzero temperature milling and HIP, its microstructure and mechanical properties

2008 · H.B. Yu, D.L. Zhang, et al. · Journal of Alloys and Compounds · 33

Monitoring the fracture of wood in torsion using acoustic emission

2006 · Zheng Chen, Brian Gabbitas, et al. · Journal of Materials Science · 33

Solution treatment of Ti-6Al-4V alloy produced by consolidating blended powder mixture using a powder compact extrusion route

2017 · Ajit Pal Singh, Fei Yang, et al. · Materials Science and Engineering A · 28

Microstructural evolution during mechanical milling of Ti/Al powder mixture and production of intermetallic TiAl cathode target

2011 · Brian Gabbitas, Peng Cao, et al. · Journal of Materials Science · 28

The performance of thermally sprayed titanium based composite coatings in molten aluminium

2011 · A. Salman, B.L. Gabbitas, et al. · Surface and Coatings Technology · 27

Effects of LaB6 additions on the microstructure and mechanical properties of a sintered and hot worked P/M Ti alloy

2016 · Jia Lou, Brian Gabbitas, et al. · Journal of Alloys and Compounds · 24

On microstructural evolution and mechanical properties of Ti-5Al-5V-5Mo-3Cr alloy synthesised from elemental powder mixtures

2018 · Fei Yang, Brian Gabbitas, et al. · Materials Chemistry and Physics · 23

PDF

Microstructural evolution during extrusion of a Ti/Al/Al35V65 (Ti–6Al–4V) powder compact and the mechanical properties of the extruded rod

2014 · Fei Yang, Deliang Zhang, et al. · Materials Science and Engineering A · 23

Consolidation of Titanium, and Ti-6Al-4V Alloy Powders by Powder Compact Forging

2009 · De Liang Zhang, Stella Raynova, et al. · Materials science forum · 22

Dynamic stress analysis of an open-shaped railway bogie frame

1996 · R.K. Luo, B.L. Gabbitas, et al. · Engineering Failure Analysis · 22

The development of porous titanium products using slip casting

2013 · Qian Xu, Brian Gabbitas, et al. · Journal of Materials Processing Technology · 21

Improving the uniformity in mechanical properties of a sintered Ti compact using a trace amount of internal lubricant

2014 · Jia Lou, Brian Gabbitas, et al. · Journal of Materials Processing Technology · 19

Measurement of stress concentration around fibre breaks in carbon-fibre/epoxy-resin composite tows

1997 · Christian Marston, Brian Gabbitas, et al. · Composites Science and Technology · 19

Failure characteristics in carbon/epoxy composite tows

1996 · Christian Marston, Brian Gabbitas, et al. · Composites Part A Applied Science and Manufacturing · 18

Study on the self sustained reactions in an Al–TiO2 composite powder produced by high-energy mechanical milling

2006 · Zhiguang Liu, Stiliana Raynova, et al. · Materials Science and Engineering A · 16

The effect of fibre sizing on fibres and bundle strength in hybrid glass carbon fibre composites

1997 · C MARSTON, B GABBITAS, et al. · Journal of Materials Science · 16

Heat Treatment, Impact Properties, and Fracture Behaviour of Ti-6Al-4V Alloy Produced by Powder Compact Extrusion

2019 · Ajit Pal Singh, Fei Yang, et al. · Materials · 15

PDF

Rapid Synthesis of a Near-β Titanium Alloy by Blended Elemental Powder Metallurgy (BEPM) with Induction Sintering

2015 · Mingtu Jia, Brian Gabbitas · Metallurgical and Materials Transactions A · 15

Works count: 110

Citation count: 1,199

H-index: 19

I10-index: 37