Get started
Author

Luis Béjar

Observed names: Béjar, Luis, L Bejar, L Bejar-Gómez, L Béjar, L Béjar-Gómez, L. Bejar, L. Bejar Gómez, L. Bejar-Gomez, L. Bejar-Gómez, L. Béjar, L. Béjar-Gómez, Luis Bejar, Luis Bejar Gomez, Luis Bejar Gómez, Luis Bejar-Gomez, Luis Béjar Gómez, Luis Béjar-Gómez
ORCID: 0000-0002-8975-1921
Observed ORCID: 0000-0002-8975-1921
OpenAlex ID: A5080101653
Study on the microstructural evolution of Ti-Nb based alloy obtained by high-energy ball milling
2017 · C. Salvo, C. Aguilar, et al. · Journal of Alloys and Compounds · 64
Synthesis and characterization of Ti–Ta–Nb–Mn foams
2015 · C. Aguilar, C. Guerra, et al. · Materials Science and Engineering C · 47
Solid solution and amorphous phase in Ti–Nb–Ta–Mn systems synthesized by mechanical alloying
2016 · C. Aguilar, P. Guzman, et al. · Journal of Alloys and Compounds · 41
SEM study on the M7C3carbide nucleation during eutectic solidification of high-chromium white irons
2005 · A. Bedolla-Jacuinde, B. Hernández, et al. · International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde) · 26
Estimation of elastic moduli of particulate-reinforced composites using finite element and modified Halpin–Tsai models
2015 · I. Alfonso, I. A. Figueroa, et al. · Journal of the Brazilian Society of Mechanical Sciences and Engineering · 20
Effects of post-discharge nitriding on the structural and corrosion properties of 4140 alloyed steel
2019 · A. Medina, C. Aguilar, et al. · Surface and Coatings Technology · 19
TEM microstructural characterization of melt-spun aged Al–6Si–3Cu–xMg alloys
2006 · Ismeli Alfonso López, Cuauhtémoc Maldonado Zepeda, et al. · Materials Characterization · 18
Effect of HVOF processing parameters on Cr3C2-NiCr hard coatings deposited on AISI 4140 steel
2023 · S. Sauceda, S. Lascano, et al. · Engineering Science and Technology an International Journal · 17
Structural Study of Novel Nanocrystalline fcc Ti-Ta-Sn Alloy
2019 · C. Aguilar, E. Pio, et al. · Metallurgical and Materials Transactions A · 17
Reduction of lubricant life in lubrication systems for internal combustion engines due to high lubricant supply rates
2022 · Saúl Domínguez-García, Rafael Maya-Yescas, et al. · Materials Letters · 16
Corrosion study of Fe-Al Intermetallic Alloys in Simulated Acid Rain
2015 · E. Huape-Padilla, M. Sánchez-Carrillo, et al. · International Journal of Electrochemical Science · 16
Characterization of ZnO nanoparticles with short-bar shape produced by chemical precipitation
2011 · A. Medina, L. Béjar, et al. · Materials Letters · 15
Production of aluminum foams with hierarchical porosity by a combination of two different manufacturing methods
2020 · B.Y. Casas, J.C. Carranza, et al. · Journal of Alloys and Compounds · 14
Neodymium Nanoparticles: Biosynthesis and Structural Analysis
2006 · J. A. Ascencio, G. Canizal, et al. · Journal of Nanoscience and Nanotechnology · 14
Maximizing Lubricant Life for Internal Combustion Engines
2022 · Saúl Domínguez-García, Luis Béjar-Gómez, et al. · Processes · 13
PDF
TEM characterization of Al–C–Cu–Al2O3 composites produced by mechanical milling
2006 · A. Santos-Beltrán, V. Gallegos-Orozco, et al. · Journal of Alloys and Compounds · 13
Electrochemical corrosion characterization of nickel aluminides in acid rain
2018 · Engelbert Huape Padilla, Ariosto Medina Flores, et al. · Matéria (Rio de Janeiro) · 10
PDF
Mass balance of the tribofilm in lubricated systems
2020 · Saúl Domínguez-García, Claudio E. Aguilar-Ramírez, et al. · Tribology International · 9
Characterization of Al-Si-Cu-Mg foams manufactured in-situ
2017 · I. Alfonso, I.A. Figueroa, et al. · Journal of Alloys and Compounds · 9
High resistance boron treated steels for railway applications
2009 · A. Bedolla-Jacuinde, J. Zuno-Silva, et al. · Materials Science and Technology · 9
Friction Coefficient Dynamics of Tribological Coatings from Engine Lubricants: Analysis and Interpretation
2023 · Saúl Domínguez García, Luis Béjar Gómez, et al. · Coatings · 8
PDF
DEM-FEM combination for modeling and simulation of fractal metallic foams
2022 · Christian Reyes, Luis Béjar, et al. · Materials Today Communications · 8
Particularities of the Formation and Modification of Si and Mg2si as Second Phases in Casting Al Alloys: Use of Shape Descriptors and Fractal Dimension
2022 · T. E. Soto, F. González, et al. · Transactions of the Indian Institute of Metals · 8
Study of the Effect of the Floating Die Compaction on Mechanical Properties of Titanium Foams
2020 · Sergio Sauceda, Sheila Lascano, et al. · Metals · 8
PDF
An Overview on the Identification and Characterization of Cu-Rich Second Phases in Casting Al Alloys
2022 · T. E. Soto, I. Alfonso, et al. · International Journal of Metalcasting · 7
Works count: 112
Citation count: 557
H-index: 14
I10-index: 17
Year
Topic
Type