Get started
Author

Lance C. Hibbeler

Observed names: L. Hibbeler, Lance Hibbeler
ORCID: 0000-0001-9305-4419
Observed ORCID: 0000-0001-9305-4419
OpenAlex ID: A5087973065
Explicit coupled thermo‐mechanical finite element model of steel solidification
2008 · Seid Koric, Lance C. Hibbeler, et al. · International Journal for Numerical Methods in Engineering · 89
Mold Slag Entrainment Mechanisms in Continuous Casting Molds
2013 · Lance C. Hibbeler, Brian G. Thomas · Iron & Steel Technology · 51
Multiphysics Model of Metal Solidification on the Continuum Level
2010 · Seid Koric, Lance C. Hibbeler, et al. · Numerical Heat Transfer Part B Fundamentals · 49
Heat Transfer in Funnel-mould Casting: Effect of Plate Thickness
2008 · Begoña Santillana, Lance C. Hibbeler, et al. · ISIJ International · 36
PDF
The Thermal Distortion of a Funnel Mold
2012 · Lance C. Hibbeler, Brian G. Thomas, et al. · Metallurgical and Materials Transactions B · 35
Effect of Grade on Thermal–Mechanical Behavior of Steel During Initial Solidification
2017 · Matthew L. S. Zappulla, Lance C. Hibbeler, et al. · Metallurgical and Materials Transactions A · 30
Process Innovations for Future Technology Nodes with Back-Side Power Delivery and 3D Device Stacking
2023 · M. Kobrinsky, J. D Silva, et al. · Technical digest - International Electron Devices Meeting/Technical digest · 26
A reduced-order model of mould heat transfer in the continuous casting of steel
2016 · Lance C. Hibbeler, Melody M. Chin See, et al. · Applied Mathematical Modelling · 26
Thermomechanical Modeling of Beam Blank Casting
2009 · Lance C. Hibbeler, Kun Xu, et al. · 26
Silicon Reliability Characterization of Intel’s Foveros 3D Integration Technology for Logic-on-Logic Die Stacking
2020 · Chetan Prasad, Sunny Chugh, et al. · IEEE International Reliability Physics Symposium proceedings · 16
Investigation of Mold Flux Entrainment in CC Molds Due to Shear Layer Instability
2010 · Lance C. Hibbeler, Brian G. Thomas · 15
Longitudinal Face Crack Prediction With Thermo-mechanical Models of Thin Slabs in Funnel Moulds
2009 · Lance C. Hibbeler, Brian G. Thomas, et al. · Frattura ed Integrità Strutturale · 15
PDF
Thermo-Mechanical Behavior During Steel Continuous Casting in Funnel Molds
2010 · Lance C. Hibbeler · Illinois Digital Environment for Access to Learning and Scholarship (University of Illinois at Urbana-Champaign) · 6
PDF
Thermal distortion of funnel molds
2011 · Lance C. Hibbeler, Brian G. Thomas, et al. · 4
Explicit coupled thermo-mechanical finite-element model of continuous casting of steel in funnel molds
2009 · Seid Korić, Lance C. Hibbeler, et al. · 4
Investigating Mould Heat Transfer in Thin Slab Casting with CON1D
2007 · Begoña Santillana, Brian G. Thomas, et al. · 4
Calibration of thermal models of steel continuous casting molds
2013 · Lance C. Hibbeler, Inwho Hwang, et al. · 3
Review of Mold Flux Entrainment Mechanisms and Model Investigation of Entrainment by Shear-Layer Instability
2011 · Lance C. Hibbeler, Rui Liu, et al. · 3
Simulation and Online Measurement of Narrow Face Mold Distortion in Thin-slab Casting
2014 · Lance C. Hibbeler, Brian G. Thomas, et al. · 2
Numerical Investigation of Slag Entrainment in Continuous Casting Molds
2014 · Kenneth E. Swartz, Lance C. Hibbeler, et al. · 2
Multiphysics Model of Continuous Casting of Steel Beam-Blanks
2011 · Brian G. Thomas, Seid Korić, et al. · 2
Calibration of Thermal Models of Continuous Casting of Steel
2012 · Lance C. Hibbeler, Melody M. Langeneckert, et al. · 1
A Study of Chiplet Distortion in Chip-to-Wafer (C2W) Hybrid Bonding
2026 · Yi Shi, Charles El Helou, et al. · IEEE Electronic Components and Technology Conference (ECTC)
Thermomechanical behavior of a wide slab-casting mold
2015 · Gavin J. Hamilton, Lance C. Hibbeler, et al.
Multiphysics modeling of the steel continuous casting process
2014 · Lance C. Hibbeler · Illinois Digital Environment for Access to Learning and Scholarship (University of Illinois at Urbana-Champaign)
PDF
Works count: 33
Citation count: 445
H-index: 12
I10-index: 12
Year
Topic
Type