Author

Seyedmehdi Hosseini

Observed names: S. M. Hosseini, S.M. Hosseini, SM Hosseini, Seyed Mehdi Hosseini

Observed institutions: Isfahan University of Technology, FZU - Institute of Physics of the Czech Academy of Sciences, Czech Technical University in Prague, Brunel University of London, University of Chemistry and Technology, Prague, Semnan University

ORCID: 0000-0001-6975-2794

Observed ORCID: 0000-0001-6975-2794

OpenAlex ID: A5100715749

The effect of carbon nanotubes on the corrosion and tribological behavior of electroless Ni–P–CNT composite coating

2011 · Mostafa Alishahi, Seyed Mahmoud Monirvaghefi, et al. · Applied Surface Science · 191

Improving strength-ductility synergy of nano/ultrafine-structured Al/Brass composite by cross accumulative roll bonding process

2023 · Majid Naseri, Mohsen Reihanian, et al. · Journal of Materials Research and Technology · 35

New Insight Into Crack-Healing Mechanism via Electropulsing Treatment

2023 · Qing Cai, Mian Zhou, et al. · Metallurgical and Materials Transactions A · 35

PDF

The improvement of ductility in nano/ultrafine grained low carbon steels via high temperature short time annealing

2012 · S.M. Hosseini, M. Alishahi, et al. · Materials Letters · 32

Influence of nano-SiCp on the foamability and microstructure of Al/TiH2 foam sheet manufactured by continual annealing and roll-bonding process

2016 · S.M. Hosseini, A. Habibolahzadeh, et al. · Materials & Design · 28

Producing the nano/ultrafine grained low carbon steel by martensite process using plane strain compression

2010 · S.M. Hosseini, A. Najafizadeh, et al. · Journal of Materials Processing Technology · 28

Synthesis and passivation behavior of electroless Ni–P‐CNT composite coating

2011 · M. Alishahi, S. M. Hosseini, et al. · Materials and Corrosion · 24

Selective Separation of 1-Butanol from Aqueous Solution through Pervaporation Using PTSMP-Silica Nano Hybrid Membrane

2020 · VSSL Prasad Talluri, Aiym Tleuova, et al. · Membranes · 23

PDF

Effect of cube texture on local softening of friction stir welded joints for nanostructured AA2024 processed by accumulative roll bonding

2023 · Majid Naseri, Mohammad Alvand, et al. · Journal of Materials Research and Technology · 21

Nano-SiCp effects on the production, microstructural evolution and compressive properties of highly porous Al/CaCO3 foam fabricated via continual annealing and roll-bonding process

2016 · S.M. Hosseini, A. Habibolahzadeh, et al. · Materials Science and Engineering A · 21

Regulating of wear properties through microstructure engineering in novel cost-effective Fe30Ni25Cr25Mo10Al10 high-entropy alloy processed by cyclic closed-die forging

2024 · Majid Naseri, Alena Myasnikova, et al. · Journal of Alloys and Metallurgical Systems · 16

Ultrahigh hardness with exceptional wear resistance of novel cost-effective nanostructured Fe40Ni25Cr25Mo5Al5 high-entropy alloy through cyclic closed-die forging process

2024 · Majid Naseri, Alena Myasnikova, et al. · Colloids and Surfaces A Physicochemical and Engineering Aspects · 15

Microstructure refinement and wear resistance enhancement of cost-effective Fe50−2xMn30Co10Cr10NixCux (x = 0, 5 at%) high-entropy alloys through cyclic closed-die forging process

2024 · Majid Naseri, Alena Myasnikova, et al. · Colloids and Surfaces A Physicochemical and Engineering Aspects · 15

Investigation of nano-SiCp effect on microstructure and mechanical properties of Al/TiH2 foam precursor produced via ARB process

2015 · S.M. Hosseini, A. Habibolahzadeh · Materials Science and Engineering A · 14

Elucidating the effect of cyclic closed-die forging processing on the microstructure and wear properties of novel low-cost [FeNi]75−xCr15Mn10Nbx (x = 0, 5, 10 at%) high-entropy alloys

2024 · Majid Naseri, Alena Myasnikova, et al. · Colloids and Surfaces A Physicochemical and Engineering Aspects · 13

Significant improvement in structural features, mechanical and physical properties of a novel CAR processed Al foam by nano-SiCp addition

2016 · S.M. Hosseini, A. Habibolahzadeh, et al. · Materials Science and Engineering A · 13

Effect of Strain Rate on Stress Corrosion Cracking of 316L Austenitic Stainless Steel in Boiling MgCl2 Environment

2012 · A. Hassani, A. Habibolahzadeh, et al. · Journal of Materials Engineering and Performance · 13

Elucidating the effect of strain path-dependent crystallographic texture evolution on the electrochemical behavior of nanostructured AA2024 aluminum alloy

2024 · Majid Naseri, Omid Imantalab, et al. · Colloids and Surfaces A Physicochemical and Engineering Aspects · 11

Elucidating the effect of accumulative roll bonding deformation routes on the electrochemical and passive behavior of AA2024 aluminum alloy

2024 · Majid Naseri, Omid Imantalab, et al. · Colloids and Surfaces A Physicochemical and Engineering Aspects · 7

Positive temperature dependence of compressive properties in an AlNiCo poly-quasicrystal fabricated by mechanical alloying and spark plasma sintering

2020 · S.M. Hosseini, P. Novák, et al. · Scripta Materialia · 6

On the Formation of AlNiCo Nano-Quasicrystalline Phase during Mechanical Alloying through Electroless Ni-P Plating of Starting Particles

2019 · Seyedmehdi Hosseini, Pavel Novák · Materials · 6

PDF

Static and dynamic responses of a novel Al nanocomposite foam/sandwich structure under bending, impact and quasi-static compression tests

2017 · SM Hosseini, A Habibolahzadeh, et al. · Journal of Sandwich Structures & Materials · 5

Effect of Process Parameters on Microstructures and Mechanical Properties of a Nano/ultrafine Grained Low Carbon Steel Produced by Martensite Treatment Using Plane Strain Compression

2012 · Seyed Mehdi Hosseini, Ahmad Kermanpur, et al. · ISIJ International · 4

PDF

Trade-Off Between Wear/Corrosion Performance and Mechanical Properties in D-AlNiCo Poly-Quasicrystals Through CNT Addition to the Microstructure

2024 · Seyedmehdi Hosseini, Pavel Novák, et al. · Metals · 2

PDF

Achieving superior strength-ductility trade-off and enhanced electrochemical performance in copper sheets via grain boundary engineering and strain composite design

2026 · Majid Naseri, Omid Imantalab, et al. · Journal of Alloys and Compounds

Works count: 26

Citation count: 578

H-index: 14

I10-index: 18