Get started
Author

Edson Costa Santos

Observed names: Costa Santos Edson, Edson C. Santos, Edson COSTA SANTOS, Edson Castro dos Santos Junior, Edson Costa SANTOS, Edson Santos, Edson, Costa Santos, Santos, Edson
Observed institutions: Universidade Tecnológica Federal do Paraná, Carl Zeiss (Germany), Serviço Nacional de Aprendizagem Industrial, Kyushu University, Japan Society for the Promotion of Science, Universidade Federal de Santa Catarina, Japan Society for the Promotion of Science London, Braskem (Brazil), The Japan Research and development Center for Metals, The University of Osaka
ORCID: 0009-0008-8726-2199
Observed ORCID: 0009-0008-8726-2199
OpenAlex ID: A5103524809
Rapid manufacturing of metal components by laser forming
2005 · Edson Costa Santos, Masanari Shiomi, et al. · International Journal of Machine Tools and Manufacture · 752
Study of rolling contact fatigue of bearing steels in relation to various oxide inclusions
2010 · Kazuya Hashimoto, Takeshi Fujimatsu, et al. · Materials & Design (1980-2015) · 140
Precipitation in 300 grade maraging steel built by selective laser melting: Aging at 510 °C for 2 h
2019 · Sabrina Bodziak, Kassim S. Al-Rubaie, et al. · Materials Characterization · 129
Effect of laser speed, layer thickness, and part position on the mechanical properties of maraging 300 parts manufactured by selective laser melting
2019 · Adriano Fagali de Souza, Kassim S. Al-Rubaie, et al. · Materials Science and Engineering A · 107
Laser gas nitriding of pure titanium using CW and pulsed Nd:YAG lasers
2006 · Edson Costa Santos, Masanori Morita, et al. · Surface and Coatings Technology · 66
Effect of inclusion/matrix interface cavities on internal-fracture-type rolling contact fatigue life
2011 · Kazuya Hashimoto, Takeshi Fujimatsu, et al. · Materials & Design (1980-2015) · 58
Optimization of Laser Deposited Ni-Based Single Crystal Superalloys Microstructure
2010 · Edson Costa Santos, Katsuyuki Kida, et al. · Advanced materials research · 37
Effect of Repeated Induction Heating on Fatigue Crack Propagation in SAE 52100 Bearing Steel
2011 · Hitonobu Koike, Edson Costa Santos, et al. · Advanced materials research · 34
Residual stress measurement techniques for Ti6Al4V parts fabricated using selective laser melting: state of the art review
2020 · Ruben B.O. Acevedo, Klaudia Kantarowska, et al. · Rapid Prototyping Journal · 25
Correlation between porosity and permeability of stainless steel filters with gradient porosity produced by SLS/SLM
2019 · Aloysio Arthur Becker Fogliatto, Carlos Henrique Ahrens, et al. · Rapid Prototyping Journal · 25
Relationship between Load, Rotation Speed and, Strength in All - PEEK and PEEK Race – PTFE Retainer Hybrid Polymer Bearings under Dry Rolling Contact Fatigue
2012 · Koshiro Mizobe, Takashi Honda, et al. · Advanced materials research · 25
Mechanical Properties of Pure Titanium Models Processed by Selective Laser Melting
2002 · Santos, Edson, Abe, F., et al. · 25
Influence of Radial Load on PEEK Plastic Bearings Life Cycle under Water Lubricated Conditions
2011 · Hitonobu Koike, Takashi Honda, et al. · Advanced materials research · 22
Fabrication of titanium dental implants by selective laser melting
2004 · Edson Santos, Kozo Osakada, et al. · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · 21
Observation of magnetic flux density around fatigue crack tips in bearing steel using an SHPM with a three-dimensional small-gap probe
2011 · Katsuyuki Kida, Edson Costa Santos, et al. · International Journal of Fatigue · 19
Feasibility of quality process control of a naphtha fractioning unit based on near-infrared spectroscopic prediction of physical and chemical properties of medium naphtha streams
2006 · Marcio V. Reboucas, Edson C. Santos, et al. · Vibrational Spectroscopy · 15
Observation of non-metallic inclusions on repeatedly quenched SAE 52100 bearing steel fracture surfaces
2012 · Koshiro Mizobe, Edson Costa Santos, et al. · International Journal of Materials and Product Technology · 14
Influence of Radial Load on PEEK Plastic Bearings Life Cycle
2010 · Hitonobu Koike, Takashi Honda, et al. · Advanced materials research · 14
Effect of Thrust Load and Rotation Speed on Wear Loss in PPS Race - PTFE Retainer Hybrid Polymer Thrust Bearings under Dry Contact
2012 · Koshiro Mizobe, Takashi Honda, et al. · Advanced materials research · 13
Investigation of wear in induction-heated AISI E 52100 steel bars under reciprocating motion
2012 · Masatoshi Koga, Edson Costa Santos, et al. · International Journal of Materials and Product Technology · 11
Influence of Cyclic Heat Treatment and Oxygen Content on the Rolling Contact Fatigue of JIS SUJ2 Bearings
2011 · Edson Costa Santos, Katsuyuki Kida, et al. · Advanced materials research · 11
Multiscale Characterization of Additive Manufacturing Components with Computed Tomography, 3D X-ray Microscopy, and Deep Learning
2025 · Herminso Villarraga-Gómez, Paul Brackman, et al. · Journal of Nondestructive Evaluation · 10
PDF
Effect of PTFE Retainer on Friction Coefficient in Polymer Thrust Bearings under Dry Contact
2013 · Koshiro Mizobe, Takashi Honda, et al. · Advanced materials research · 10
Wear Resistance Improvement of Titanium Bearings by Laser Gas Nitriding
2011 · Edson Costa Santos, Katsuyuki Kida, et al. · Advanced materials research · 10
Changes in magnetic flux density around fatigue crack tips of carbon tool steels
2009 · Takashi Honda, Katsuyuki Kida, et al. · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · 10
Works count: 99
Citation count: 1,784
H-index: 15
I10-index: 25
Year
Topic
Type