Author

Koh AGATSUMA

Observed names: K Agatsuma, K. AGATSUMA, K. Agatsuma, Koh Agatsuma

Observed institutions: Waseda University, Sumitomo Electric Industries (Japan), Cryogenics and Superconductivity Society of Japan, Waseda Research Institute for Science and Engineering, Research Institute of Superconductor Science and Systems, Kyushu University, National Institute of Advanced Industrial Science and Technology

OpenAlex ID: A5111633620

Stability Analysis of HTS Power Cable With Fault Currents

2010 · Mitsuho Furuse, Shuichiro Fuchino, et al. · IEEE Transactions on Applied Superconductivity · 29

Evaluation of Magnetic-Field Distribution by Screening Current in Multiple REBCO Coils

2014 · Hiroshi Ueda, Atsushi Ishiyama, et al. · IEEE Transactions on Applied Superconductivity · 27

Safety and Reliability of 66-kV Class HTS Cable Systems in Short-Circuit Current Accidents-Experimental Results on 40-m Cable System

2017 · Takato Masuda, Toshiya Morimura, et al. · IEEE Transactions on Applied Superconductivity · 20

Design and Test of Filter of High Gradient Magnetic Separation System for Trapping Immunoglobulin in Serum

2009 · H. Ueda, K. Agatsuma, et al. · IEEE Transactions on Applied Superconductivity · 20

Evaluation of loss of current leads for HTS power apparatuses

2008 · Mitsuho Furuse, Koh Agatsuma, et al. · Cryogenics · 19

Transient cooling in internally cooled, cabled superconductors (ICCS)

1981 · S. Shanfield, K. Agatsuma, et al. · IEEE Transactions on Magnetics · 16

Reduction of Irregular Magnetic Field Generated by Screening Current in REBCO Coil

2014 · Hiroshi Ueda, Jun Saito, et al. · IEEE Transactions on Applied Superconductivity · 15

Improvement of a High-Gradient Magnetic Separation System for Trapping Immunoglobulin in Serum

2010 · Hiroshi Ueda, Koh Agatsuma, et al. · IEEE Transactions on Applied Superconductivity · 15

Temperature and Pressure Simulation of a 1.5-km HTS Power Cable Cooled by Subcooled With a Fault Current

2016 · Tetsuo Yasui, Yusuke Sato, et al. · IEEE Transactions on Applied Superconductivity · 13

Development of Superconducting High Gradient Magnetic Separation System for Medical Protein Separation

2013 · Shuichiro Fuchino, Mitsuho Furuse, et al. · IEEE Transactions on Applied Superconductivity · 13

Mechanical properties of a niobium-tin superconductor reinforced by tantalum cores

2001 · J. Kondoh, H. Tateishi, et al. · IEEE Transactions on Applied Superconductivity · 13

Fiber-reinforced-superconductors for a 15 T-class high-field pulsed magnet and their conceptual design

1993 · K. Arai, H. Tateishi, et al. · IEEE Transactions on Applied Superconductivity · 13

Temperature and Pressure Distribution Simulations of 3-km-Long High-Temperature Superconducting Power Cable System With Fault Current for 66-kV-Class Transmission Lines

2017 · Tetsuo Yasui, Natsuko Takeda, et al. · IEEE Transactions on Applied Superconductivity · 12

Temperature and Pressure Simulation of a High-Temperature Superconducting Cable Cooled by Subcooled $\mbox{LN}_2$ With Fault Current

2014 · Yusuke Sato, Koh Agatsuma, et al. · IEEE Transactions on Applied Superconductivity · 12

Equation of state for liquid helium from 1.4 to 4 K and asymptotic limits at the lamda line

1985 · V. Arp, K. Agatsuma · International Journal of Thermophysics · 12

Properties of $rm MgB_2$ Superconductor by Doping Impurity of SiC, Graphite, $rm C_60$ , and C Nano-Tube

2006 · K. Agatsuma, M. Furuse, et al. · IEEE Transactions on Applied Superconductivity · 11

Performance of Filters in Medical Protein Separation System Using Superconducting Magnet

2013 · Hiroshi Ueda, Koh Agatsuma, et al. · IEEE Transactions on Applied Superconductivity · 10

Influence of Ta-reinforcement geometry in Nb/sub 3/Sn wires

2003 · J. Kondoh, M. Umeda, et al. · IEEE Transactions on Applied Superconductivity · 10

Development of an internally reinforced superconductor for a high-field pulsed magnet

1993 · K. Arai, H. Tateishi, et al. · Fusion Engineering and Design · 9

Properties of fiber-reinforced niobium-tin superconductor fabricated by bronze process

1999 · H. Tateishi, K. Agatsuma, et al. · IEEE Transactions on Applied Superconductivity · 8

Influence of mass flow rate and hydraulic perimeter on the transient stability margin of a forced flow cooled superconductor

1991 · K. Agatsuma · Cryogenics · 8

The forced cooled Nb3Sn superconductor and its magnet

1983 · K. Agatsuma, K. Kaiho, et al. · IEEE Transactions on Magnetics · 8

Comparison Between Simulation and Experimental Results of Liquid Nitrogen Coolant Distribution in a 66-kV 40-m Model HTS Power Cable System Experiencing Short-Circuit Accidents

2019 · Daichi Horita, Koh Agatsuma, et al. · IEEE Transactions on Applied Superconductivity · 7

Nb3Sn thin films made by RF magnetron sputtering process with a reacted Nb3Sn powder target

1996 · K. Agatsuma, H. Tateishi, et al. · IEEE Transactions on Magnetics · 7

Superconducting Properties and Characterization of High-Tc Oxides

1987 · N. Sadakata, Y. Ikeno, et al. · Japanese Journal of Applied Physics · 7

PDF

Works count: 78

Citation count: 446

H-index: 12

I10-index: 18