Author

J. Daniel Whittenberger

Observed names: J Daniel Whittenberger, J WHITTENBERGER, J Whittenberger, J. D. Whittenberger, J. Whittenberger, J.D Whittenberger, J.D. WhITTENBERGER, J.D. Whittenberger, J.Daniel Whittenberger, JD Whittenberger, Whittenberger, J. D., Whittenberger, J. Daniel

Observed institutions: Max Planck Society, Purdue University West Lafayette, Glenn Research Center, National Metallurgical Laboratory, National Aeronautics and Space Administration, Case Western Reserve University, Texas Instruments (United States), Rice University, ExxonMobil (United States)

OpenAlex ID: A5111824478

Mechanical milling/alloying of intermetallics

1996 · C.C. Koch, J.D. Whittenberger · Intermetallics · 360

Processing and mechanical properties of in-situ composites from the NiAlCr and the NiAl(Cr,Mo) eutectic systems

1995 · D.R. Johnson, X.F. Chen, et al. · Intermetallics · 266

Effect of composition and grain size on slow plastic flow properties of NiAl between 1200 and 1400 K

1987 · J. Daniel Whittenberger · Journal of Materials Science · 116

Elevated temperature slow plastic deformation of NiAl-TiB2 particulate composites at 1200 and 1300K

1990 · J. Daniel Whittenberger, R. K. Viswanadham, et al. · Journal of Materials Science · 102

Influence of thermomechanical processing on elevated temperature slow plastic flow properties of B2 aluminide Fe-39.8at.%Al

1983 · J.Daniel Whittenberger · Materials Science and Engineering · 96

Fluoride Salts and Container Materials for Thermal Energy Storage Applications in the Temperature Range 973 – 1400 K

1987 · Ajay K. Misra, J. Daniel Whittenberger · Intersociety Energy Conversion Engineering Conference · 89

Preliminary investigation of a NiAl composite prepared by cryomilling

1990 · J. Daniel Whittenberger, Eduard Arzt, et al. · Journal of materials research/Pratt's guide to venture capital sources · 80

The influence of grain size and composition on slow plastic flow in FeAl between 1100 and 1400 K

1986 · J.Daniel Whittenberger · Materials Science and Engineering · 80

The influence of grain size and composition on 1000 to 1400K slow plastic flow properties of NiAl

1988 · J. Daniel Whittenberger · Journal of Materials Science · 71

Creep and tensile properties of several oxide dispersion strengthened nickel base alloys

1977 · J. Daniel Whittenberger · Metallurgical Transactions A · 71

The effect of temperature and Fe: Al ratio on the flow and fracture of FeAl

1995 · I. Baker, H. Xiao, et al. · Acta Metallurgica et Materialia · 66

Stress relaxation of low pressure plasma-sprayed NiCrAlY alloys

1993 · W.J. Brindley, J.D. Whittenberger · Materials Science and Engineering A · 58

Directional solidification and mechanical properties of NiAlNiAlTa alloys

1995 · D.R. Johnson, X.F. Chen, et al. · Intermetallics · 51

PDF

Discontinuously reinforced intermetallic matrix composites via XD synthesis

1992 · K. S. Kumar, J. D. Whittenberger · Materials Science and Technology · 51

Creep rupture analysis and remaining life assessment of 2.25Cr–1Mo steel tubes from a thermal power plant

2006 · A.K. Ray, Y.N. Tiwari, et al. · Materials Science and Engineering A · 49

NiAl-based polyphase in situ composites in the NiAlTaX (X = Cr, Mo, or V) systems

1995 · D.R. Johnson, B.F. Oliver, et al. · Intermetallics · 47

PDF

1300 K compressive properties of a reaction milled NiAl–AlN composite

1990 · J. Daniel Whittenberger, Eduard Arzt, et al. · Journal of materials research/Pratt's guide to venture capital sources · 47

1200 to 1400 K slow strain rate compressive behavior of small grain size NiAl/Ni2AlTi alloys and NiAl/Ni2AlTi–TiB2 composites

1989 · J. Daniel Whittenberger, R. K. Viswanadham, et al. · Journal of materials research/Pratt's guide to venture capital sources · 45

Fatigue behavior of a thermal barrier coated superalloy at 800°C

2006 · A.K. Ray, E.S. Dwarakadasa, et al. · Materials Science and Engineering A · 44

Microstructure and phase stability of single crystal NiAl alloyed with Hf and Zr

1996 · I. E. Locci, R.M. Dickerson, et al. · Journal of materials research/Pratt's guide to venture capital sources · 42

Effect of growth rate on elevated temperature plastic flow androom temperature fracture toughness of directionally solidified NiAl-31Cr-3Mo

1999 · J.Daniel Whittenberger, S.V. Raj, et al. · Intermetallics · 41

PDF

Elevated temperature deformation of Cr3Si alloyed with Mo

1999 · S.V. Raj, J. Daniel Whittenberger, et al. · Intermetallics · 41

Elevated temperature strength and room-temperature toughness of directionally solidified Ni-33Al-33Cr-1Mo

2002 · J. Daniel Whittenberger, S. V. Raj, et al. · Metallurgical and Materials Transactions A · 39

Compression behavior of the forged L12 compounds Al67Ti25Cr8 and Al66Ti25Mn9

1990 · S.A. Brown, K.S. Kumar, et al. · Scripta Metallurgica et Materialia · 39

Slow plastic strain rate compressive flow in binary CoAl intermetallics

1985 · J. Daniel Whittenberger · Materials Science and Engineering · 38

Works count: 197

Citation count: 3,420

H-index: 31

I10-index: 79