Get started
Author

Stephen A. Idem

Observed names: S A Idem, S. A. IDEM, S. A. Idem, S. A. Idem, A. M. Jacobi, V. W. Gol, S. Idem, S.A Idem, S.A. Idem, STEPHEN IDEM, Stephen Idem
OpenAlex ID: A5113610605
Heat Transfer Characterization of a Finned-Tube Heat Exchanger (With and Without Condensation)
1990 · S. A. Idem, A. M. Jacobi, et al. · ASME Journal of Heat and Mass Transfer · 41
Study to identify computational fluid dynamics models for use in determining HVAC duct fitting loss coefficients
2016 · Mohammad Salehi, Ahmad K. Sleiti, et al. · Science and Technology for the Built Environment · 22
Detailed velocity profiles in close-coupled elbows—Measurements and computational fluid dynamics predictions (RP-1682)
2017 · Ahmad Sleiti, Mohammad Salehi, et al. · Science and Technology for the Built Environment · 19
PDF
Pressure Loss Coefficient Measurements of Two Close-Coupled HVAC Elbows
2005 · Nanda Kishore Mylaram, Stephen Idem · Science and Technology for the Built Environment · 18
Experimental determination and computational fluid dynamics predictions of pressure loss in close-coupled elbows (RP-1682)
2017 · Mohammad Salehi, Stephen Idem, et al. · Science and Technology for the Built Environment · 17
PDF
Sensible and Latent Heat Transfer to a Baffled Finned-Tube Heat Exchanger
1993 · S. A. IDEM, V. W. GOLDSCHMIDT · Heat Transfer Engineering · 17
Computational fluid dynamics to predict duct fitting losses: Challenges and opportunities
2013 · Ahmad K. Sleiti, John Zhai, et al. · Science and Technology for the Built Environment · 14
A General Matrix Approach to Model Steady-State Performance of Cross-Flow Heat Exchangers
2012 · Karthik Silaipillayarputhur, Stephen Idem · Heat Transfer Engineering · 14
Predicting the Performance of Multistage Heat Exchangers
1993 · A. M. JACOBI, S. A. IDEM, et al. · Heat Transfer Engineering · 13
Performance of air-to-water copper finned-tube heat exchangers at moderately low air-side Reynolds numbers, including effects of baffles
1987 · S.A. Idem, C. Jung, et al. · International Journal of Heat and Mass Transfer · 13
Transient Performance of a Cross Flow Heat Exchanger Using Finite Difference Analysis
2008 · Fatir Hussain Syed, Stephen Idem · ASME International Mechanical Engineering Congress and Exposition (IMECE) · 11
Pressure and velocity variation in a fabric air dispersion system
2014 · J. Leverette, K. Gebke, et al. · Science and Technology for the Built Environment · 10
Loss coefficient measurements for flat oval elbows and transitions
1996 · B. Townsend, Fariborz Khodabakhsh, et al. · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · 10
Transient Response of a Cross Flow Heat Exchanger Subjected to Temperature and Flow Perturbations
2015 · Karthik Silaipillayarputhur, Stephen A. Idem · ASME International Mechanical Engineering Congress and Exposition (IMECE) · 9
On-Line Performance Model of the Convection Passes of a Pulverized Coal Boiler
2010 · Corey Cantrell, Stephen Idem · Heat Transfer Engineering · 9
Loss coefficient measurements in divided-flow flat oval fittings
1996 · B. Townsend, Fariborz Khodabakhsh, et al. · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · 9
Influence of Area Ratio On Flat Oval Divided-Flow Fitting Loss Coefficients
1999 · Stephen Idem, Fariborz Khodabakhsh · Science and Technology for the Built Environment · 7
Step Response of a Single-Pass Crossflow Heat Exchanger With Variable Inlet Temperatures and Mass Flow Rates
2011 · Karthik Silaipillayarputhur, Stephen A. Idem · ASME International Mechanical Engineering Congress and Exposition (IMECE) · 6
Step Response of a Single-Pass Crossflow Heat Exchanger With Variable Inlet Temperatures and Mass Flow Rates
2012 · Karthik Silaipillayarputhur, Stephen A. Idem · Journal of Thermal Science and Engineering Applications · 5
Laboratory testing of converging flow flat oval tees and laterals to determine loss coefficients (RP-1488)
2011 · D. Kulkarni, J. Cui, et al. · Science and Technology for the Built Environment · 5
Equivalent round diameter of spiral flat oval ducts
1994 · B. Townsend, Stephen Idem, et al. · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · 5
Impact of ultrasonic mixing on virgin and waste vegetable oils for biodiesel production
2023 · Saanyol Ityokumbul Igbax, Daniel Swartling, et al. · Frontiers in Energy Research · 4
PDF
Modeling flow and pressure distributions in multi-branch light-commercial duct systems
2020 · C. Kodali, S. Idem · Science and Technology for the Built Environment · 4
Transient Performance Model for a Multipass Cross-Flow Heat Exchanger
2013 · Karthik Silaipillayarputhur, Stephen Idem · Heat Transfer Engineering · 4
Pressure loss in fully stretched nonmetallic flexible duct with a bend
2013 · R. K. Hodges, D. Kulkarni, et al. · Science and Technology for the Built Environment · 4
Works count: 72
Citation count: 336
H-index: 11
I10-index: 13
Year
Topic
Type