Get started
Author

Karodi Venkateswarlu

Observed names: K VENKATESWARLU, K Venkateswarlu, K. VENKATESWARLU, K. Venkateswarlu, Venkateswarlu K, Venkateswarlu K.
Observed institutions: Advanced Materials and Processes Research Institute, National Aerospace Laboratories, Indian Institute of Technology Kharagpur, University of Alberta, National Institute of Technology Jamshedpur, Purdue University West Lafayette, KLE Technological University, Hindustan Aeronautics Limited (India), National Metallurgical Laboratory, National Institute of Technology Andhra Pradesh, Council of Scientific and Industrial Research, Indian Institute of Technology Kanpur
ORCID: 0000-0002-7791-0120
Observed ORCID: 0000-0002-7791-0120
OpenAlex ID: A5113635628
A study on the influence of process parameters on the Mechanical Properties of 3D printed ABS composite
2016 · K.G. Jaya Christiyan, U. Chandrasekhar, et al. · IOP Conference Series Materials Science and Engineering · 302
PDF
Sliding wear behavior of some Al-Si alloys: Role of shape and size of Si particles and test conditions
1998 · B. K. Prasad, K. Venkateswarlu, et al. · Metallurgical and Materials Transactions A · 123
Study on cryorolled Al–Cu alloy using X-ray diffraction line profile analysis and evaluation of strengthening mechanisms
2013 · N. Naga Krishna, R. Tejas, et al. · Materials & Design (1980-2015) · 99
Microstructure, tensile strength and wear behaviour of Al–Sc alloy
2004 · K. Venkateswarlu, L.C. Pathak, et al. · Materials Science and Engineering A · 82
Effect of cryorolling on the mechanical properties of AA5083 alloy and the Portevin–Le Chatelier phenomenon
2014 · K.S.V.B.R. Krishna, K. Chandra Sekhar, et al. · Materials & Design (1980-2015) · 78
An investigation of sliding wear behaviour of WC–Co coating
2011 · V. Rajinikanth, K. Venkateswarlu · Tribology International · 77
Microstructural evolution and aging behavior of cryorolled Al–4Zn–2Mg alloy
2011 · K. Gopala Krishna, K. Sivaprasad, et al. · Materials Science and Engineering A · 62
Fabrication of TiN reinforced aluminium metal matrix composites through a powder metallurgical route
2002 · Ajoy Kumar Ray, K Venkateswarlu, et al. · Materials Science and Engineering A · 60
Dry Sliding Wear Properties of a 7075-T6 Aluminum Alloy Coated with Ni-P (h) in Different Pretreatment Conditions
2009 · Jothi Sudagar, K. Venkateswarlu, et al. · Journal of Materials Engineering and Performance · 56
PDF
Effect of repetitive corrugation and straightening on Al and Al–0.25Sc alloy
2007 · V. Rajinikanth, Gaurav Arora, et al. · Materials Letters · 55
Manufacture of Al–Ti–B master alloys by the reaction of complex halide salts with molten aluminium
1999 · B.S Murty, S.A Kori, et al. · Journal of Materials Processing Technology · 53
Flexural Properties of PLA Components Under Various Test Condition Manufactured by 3D Printer
2016 · K. G. Jaya Christiyan, U. Chandrasekhar, et al. · Journal of The Institution of Engineers (India) Series C · 52
Characterization of interface of Al2O3–304 stainless steel braze joint
2007 · Abhijit Kar, Sudipta Mandal, et al. · Materials Characterization · 52
Effect of hot rolling and heat treatment of Al–5Ti–1B master alloy on the grain refining efficiency of aluminium
2001 · K. Venkateswarlu, B.S. Murty, et al. · Materials Science and Engineering A · 51
An Intelligent and Lightweight ML Model for Real-Time DDoS Attack Detection in IoT Networks
2025 · N Radhika Amareshwari, K Venkateswarlu, et al. · International Conference on Innovative Mechanisms for Industry Applications · 49
Mechanical anisotropy and microstructural changes during cryorolling of Al–Mg–Si alloy
2015 · N. Naga Krishna, M. Ashfaq, et al. · Materials Characterization · 43
Influence of the size and morphology of silicon particles on the physical, mechanical and tribological properties of some aluminium ? silicon alloys
1996 · B. K. Prasad, K. Venkateswarlu, et al. · Journal of Materials Science Letters · 41
Synthesis of TiN Reinforced Aluminium Metal Matrix Composites Through Microwave Sintering
2009 · K. Venkateswarlu, Suman Saurabh, et al. · Journal of Materials Engineering and Performance · 40
Abrasive wear behavior of thermally sprayed diamond reinforced composite coating deposited with both oxy-acetylene and HVOF techniques
2009 · K. Venkateswarlu, V. Rajinikanth, et al. · Wear · 40
Microstructure and mechanical properties of Al – 3Mg – 0.25 Sc alloy sheets produced by cryorolling
2018 · S. Vigneshwaran, K. Sivaprasad, et al. · Materials Science and Engineering A · 39
Influence of Cu Addition on Dry Sliding Wear Behaviour of A356 Alloy
2014 · M.S. Prabhudev, V. Auradi, et al. · Procedia Engineering · 37
PDF
A comparison of repetitive corrugation and straightening and high-pressure torsion using an Al-Mg-Sc alloy
2016 · Prabhakar M. Bhovi, Deepak C. Patil, et al. · Journal of Materials Research and Technology · 36
PDF
A theoretical and experimental evaluation of repetitive corrugation and straightening: Application to Al–Cu and Al–Cu–Sc alloys
2011 · S.C. Pandey, M.A. Joseph, et al. · Materials Science and Engineering A · 35
Microstructural modifications induced during spray deposition of Al–Si–Fe alloys and their mechanical properties
2007 · V.C. Srivastava, R.K. Mandal, et al. · Materials Science and Engineering A · 35
Study of Mechanical Properties & Residual Stresses on Post Wear Samples of A356-SiC Metal Matrix Composites
2014 · Mohan Vanarotti, P. Shrishail, et al. · Procedia Materials Science · 32
PDF
Works count: 123
Citation count: 2,469
H-index: 29
I10-index: 59
Year
Topic
Type