Author

Avishek Kumar

Observed names: A. Arun Kumar, A. Kumar, Kumar, Avishek

Observed institutions: Agency for Science, Technology and Research, Indian Institute of Technology Roorkee, National University of Singapore, Nanyang Technological University, Institute of Materials Research and Engineering, Solar Energy Research Institute of Singapore, University of Technology Malaysia, James Cook University

OpenAlex ID: A5113824534

Photovoltaic/photo-electrocatalysis integration for green hydrogen: A review

2022 · Piyali Chatterjee, Mounika Sai Krishna Ambati, et al. · Energy Conversion and Management · 169

p‐CuO/n‐Si heterojunction solar cells with high open circuit voltage and photocurrent through interfacial engineering

2014 · Saeid Masudy‐Panah, Goutam Kumar Dalapati, et al. · Progress in Photovoltaics Research and Applications · 100

Functional nanomaterials, synergisms, and biomimicry for environmentally benign marine antifouling technology

2021 · Avishek Kumar, Ahmed AL-Jumaili, et al. · Materials Horizons · 97

Maximizing solar energy production in ASEAN region: Opportunity and challenges

2023 · Goutam Kumar Dalapati, Siddhartha Ghosh, et al. · Results in Engineering · 69

Reduction of Cu-rich interfacial layer and improvement of bulk CuO property through two-step sputtering for p-CuO/n-Si heterojunction solar cell

2014 · Saeid Masudy-Panah, Goutam Kumar Dalapati, et al. · Journal of Applied Physics · 64

PDF

Optical bandgap widening and phase transformation of nitrogen doped cupric oxide

2015 · Saeid Masudy-Panah, K. Radhakrishnan, et al. · Journal of Applied Physics · 54

PDF

Eco-friendly nanocomposites derived from geranium oil and zinc oxide in one step approach

2019 · Ahmed Al-Jumaili, Peter Mulvey, et al. · Scientific Reports · 43

PDF

Plasma Treatment of Polymeric Membranes

2018 · Ahmed Al-Jumaili, Surjith Alancherry, et al. · Elsevier eBooks · 42

Aluminium alloyed iron-silicide/silicon solar cells: A simple approach for low cost environmental-friendly photovoltaic technology

2015 · Goutam Kumar Dalapati, Saeid Masudy-Panah, et al. · Scientific Reports · 38

PDF

Evaluation of mechanism of cold atmospheric pressure plasma assisted polymerization of acrylic acid on low density polyethylene (LDPE) film surfaces: Influence of various gaseous plasma pretreatment

2018 · M.C. Ramkumar, K. Navaneetha Pandiyaraj, et al. · Applied Surface Science · 36

Plant Secondary Metabolite-Derived Polymers: A Potential Approach to Develop Antimicrobial Films

2018 · Ahmed Al-Jumaili, Avishek Kumar, et al. · Polymers · 31

PDF

Biodegradable optically transparent terpinen-4-ol thin films for marine antifouling applications

2018 · Avishek Kumar, Scott Mills, et al. · Surface and Coatings Technology · 27

Tailoring the surface properties of polypropylene films through cold atmospheric pressure plasma (CAPP) assisted polymerization and immobilization of biomolecules for enhancement of anti-coagulation activity

2016 · K. Navaneetha Pandiyaraj, M.C. Ram Kumar, et al. · Applied Surface Science · 27

Pulse Plasma Deposition of Terpinen-4-ol: An Insight into Polymerization Mechanism and Enhanced Antibacterial Response of Developed Thin Films

2019 · Avishek Kumar, Ahmed Al-Jumaili, et al. · Plasma Chemistry and Plasma Processing · 22

Evaluation of surface properties of low density polyethylene (LDPE) films tailored by atmospheric pressure non-thermal plasma (APNTP) assisted co-polymerization and immobilization of chitosan for improvement of antifouling properties

2018 · K.N. Pandiyaraj, M.C. Ramkumar, et al. · Materials Science and Engineering C · 22

Atmospheric pressure non-thermal plasma assisted polymerization of poly (ethylene glycol) methylether methacrylate (PEGMA) on low density polyethylene (LDPE) films for enhancement of biocompatibility

2017 · M.C. Ramkumar, K. Navaneetha Pandiyaraj, et al. · Surface and Coatings Technology · 21

Effect of cold atmospheric pressure plasma gas composition on the surface and cyto-compatible properties of low density polyethylene (LDPE) films

2016 · K. Navaneetha Pandiyaraj, A. Arun Kumar, et al. · Current Applied Physics · 20

Exploring the Potential and Roadblocks of Marketable Energy‐Storage Technologies for Renewable Energy

2025 · Mukund Srivastava, Brindha Ramasubramanian, et al. · Energy Technology · 18

Functionalized Graphene-Incorporated Cupric Oxide Charge-Transport Layer for Enhanced Photoelectrochemical Performance and Hydrogen Evolution

2023 · Ambati Mounika Sai Krishna, Brindha Ramasubramanian, et al. · Catalysts · 18

PDF

Recent Progress in Marine Antifouling Technology Based on Graphene and Graphene Oxide Nanocomposite Materials

2023 · Igor Levchenko, Avishek Kumar, et al. · Advanced Engineering Materials · 16

Development of phosphor containing functional coatings via cold atmospheric pressure plasma jet - Study of various operating parameters

2019 · K. Navaneetha Pandiyaraj, M.C. Ramkumar, et al. · Applied Surface Science · 16

Influence of operating parameters on development of polyethylene oxide-like coatings on the surfaces of polypropylene films by atmospheric pressure cold plasma jet-assisted polymerization to enhance their antifouling properties

2018 · K.N. Pandiyaraj, A. Arun Kumar, et al. · Journal of Physics and Chemistry of Solids · 16

Integration of β-FeSi2 with poly-Si on glass for thin-film photovoltaic applications

2013 · A. Kumar, G. K. Dalapati, et al. · RSC Advances · 16

Plasma Polymerization: Electronics and Biomedical Application

2017 · Avishek Kumar, Daniel Grant, et al. · Springer eBooks · 15

Effect of processing parameters on the deposition of SiOx-like coatings on the surface of polypropylene films using glow discharge plasma assisted polymerization for tissue engineering applications

2017 · K. Navaneetha Pandiyaraj, A. Arun Kumar, et al. · Vacuum · 14

Works count: 39

Citation count: 1,107

H-index: 18

I10-index: 32