Ideko (Spain)

ROR: 003qafx79

OpenAlex ID: I4210087272

Chatter suppression techniques in metal cutting

2016 · J. Munoa, X. Beudaert, et al. · CIRP Annals · 723

In Introductory Review to THz Non-Destructive Testing of Composite Mater

2012 · I. Amenabar, F. Lopez, et al. · Journal of Infrared Millimeter and Terahertz Waves · 264

Comparison and analysis of non-destructive testing techniques suitable for delamination inspection in wind turbine blades

2011 · I. Amenabar, A. Mendikute, et al. · Composites Part B Engineering · 254

Machine tools for large parts

2013 · L. Uriarte, M. Zatarain, et al. · CIRP Annals · 251

Machining evaluation of a hybrid MQL-CO2 grinding technology

2010 · J.A. Sanchez, I. Pombo, et al. · Journal of Cleaner Production · 193

Optimization of multiple tuned mass dampers to suppress machine tool chatter

2010 · Y. Yang, J. Muñoa, et al. · International Journal of Machine Tools and Manufacture · 192

Evaluation of the mechanical properties of Inconel 718 components built by laser cladding

2011 · I. Tabernero, A. Lamikiz, et al. · International Journal of Machine Tools and Manufacture · 190

The effect of serration on mechanics and stability of milling cutters

2010 · Zoltan Dombovari, Yusuf Altintas, et al. · International Journal of Machine Tools and Manufacture · 177

An Industry 4.0 maturity model for machine tool companies

2020 · Lizarralde Dorronsoro Rafael, Ganzarain Epelde Jaione, et al. · Technological Forecasting and Social Change · 165

Stability of milling processes with continuous spindle speed variation: Analysis in the frequency and time domains, and experimental correlation

2008 · M. Zatarain, I. Bediaga, et al. · CIRP Annals · 137

Analysis of the Influence of Mill Helix Angle on Chatter Stability

2006 · M. Zatarain, J. Muñoa, et al. · CIRP Annals · 134

Five-Axis Machining and Burnishing of Complex Parts for the Improvement of Surface Roughness

2011 · Luis N. López de Lacalle, A. Rodríguez, et al. · Materials and Manufacturing Processes · 112

Digital Manufacturing Platforms in the Industry 4.0 from Private and Public Perspectives

2019 · Jon Kepa Gerrikagoitia, Gorka Unamuno, et al. · Applied Sciences · 106

PDF

Extent of the use of Lean concepts proposed for a value stream mapping application

2009 · Ibon Serrano Lasa, Rodolfo de Castro, et al. · Production Planning & Control · 104

Chatter suppression in ram type travelling column milling machines using a biaxial inertial actuator

2013 · J. Munoa, I. Mancisidor, et al. · CIRP Annals · 101

On the global dynamics of chatter in the orthogonal cuttingmodel

2010 · Zoltan Dombovari, David A.W. Barton, et al. · International Journal of Non-Linear Mechanics · 95

Non-destructive testing of composite materials by means of active thermography-based tools

2015 · Miguel Lizaranzu, Alberto Lario, et al. · Infrared Physics & Technology · 91

Ball bearing damage detection using traditional signal processing algorithms

2013 · Inigo Bediaga, Xabier Mendizabal, et al. · IEEE Instrumentation & Measurement Magazine · 90

Active suppression of structural chatter vibrations using machine drives and accelerometers

2015 · Jokin Munoa, Xavier Beudaert, et al. · CIRP Annals · 89

Electro-discharge machining (EDM) versus hard turning and grinding—Comparison of residual stresses and surface integrity generated in AISI O1 tool steel

2007 · V. García Navas, I. Ferreres, et al. · Journal of Materials Processing Technology · 89

An automatic spindle speed selection strategy to obtain stability in high-speed milling

2008 · I. Bediaga, J. Muñoa, et al. · International Journal of Machine Tools and Manufacture · 88

Advances in centerless grinding technology

2012 · Fukuo Hashimoto, Ivan Gallego, et al. · CIRP Annals · 86

Hydrodynamic Bearing Lubricated with Magnetic Fluids

2009 · Harkaitz Urreta, Zoltan Leicht, et al. · Journal of Intelligent Material Systems and Structures · 81

Linear programming and windowing based feedrate optimization for spline toolpaths

2017 · Kaan Erkorkmaz, Qing-Ge (Christina) Chen, et al. · CIRP Annals · 80

Zero Defect Manufacturing Strategies for Reduction of Scrap and Inspection Effort in Multi-stage Production Systems

2018 · Florian Eger, Daniel Coupek, et al. · Procedia CIRP · 72

PDF

Works count: 394

Citation count: 17,880