Preliminary studies of a phosphogypsum stabilisation process using a sulphur polymer matrix
Year: 2009
Type: article
Abstract: The production of phosphoric acid from natural phosphate rock by means of the wet process gives rise to an industrial by-product named phosphogypsum (PG). World PG generation is estimated to be around 100-280 million tonnes/year. PG is mainly composed of gypsum but also contains a high level of impurities such as phosphates, fluorides, naturally occurring radionuclides, heavy metals, and other trace elements. All of this adds up to a negative environmental impact and many restrictions on PG applications. PG is disposed of without any treatment, usually by dumping in large stockpiles that occupy considerable land areas and cause serious environmental damage, particularly in coastal regions. The USEPA has classified PG as a “Technologically Enhanced Naturally Occurring Radioactive Material” (TENORM). \nThis paper reports a proposed PG stabilisation/solidification (S/S) process by means of sulphur polymer concrete. Final products have been obtained in the form of standard monoliths. Mechanical properties (compressive and flexural strength) have been studied and radionuclide contents determined. Results show the obtainment of sulphur and phosphogypsum concretes with good mechanical properties and low radionuclide contents. The PG S/S process can thus be considered a very suitable and efficient option for PG disposal.
Authors: Hanan Tayibi, Aurora López‐Delgado, Mohamed Choura, C. Gascó, N. Navarro, Francisco José Alguacil, Félix A. López
Language: English
Subfield: Building and Construction
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W1012575598
