Work

Leachability of nitrided ilmenite in hydrochloric acid

Year: 2011
Type: article
Abstract: Titanium nitride in upgraded nitrided ilmenite (bulk of iron \nremoved) can selectively be chlorinated to produce titanium \ntetrachloride. Except for iron, most other components present \nduring this low temperature (ca. 200°C) chlorination reaction will \nnot react with chlorine. It is therefore necessary to remove as much \niron as possible from the nitrided ilmenite. Hydrochloric acid \nleaching is a possible process route to remove metallic iron from \nnitrided ilmenite without excessive dissolution of species like \ntitanium nitride and calcium oxide. Calcium oxide dissolution \nresults in unrecoverable acid consumption. The leachability of \nnitrided ilmenite in hydrochloric acid was evaluated by determining \nthe dissolution of species like aluminium, calcium, titanium and \nmagnesium in a batch leach reactor for 60 minutes at 90°C under \nreflux conditions. The hydrochloric acid concentration (11%, 18% \nand 25%), initial acid-to-iron mole ratio (2:1, 2.5:1 and 3.3:1), and \nsolid-to-liquid mass ratio (1:8.33 to 1:2.13) were varied. The results \nindicate that a hydrochloric acid concentration of 25 wt% supplied \nin a 2:1 acid-to-iron mole ratio would produce the most favourable \nupgraded nitrided ilmenite product. The dissolution of iron in this \nsolution reached 97 per cent after only 60 minutes. The total \ndissolution of calcium and titanium species was 0.01 and 0.11 wt% \nrespectively. Hydrochloric acid can therefore be used as lixiviant to \nremove metallic iron from nitrided ilmenite.
Language: English
Open Access status: green
OpenAlex ID: W1527285387
FWCI: 0.775
Cites: 9
Cited by: 5
Related to: 10