Collimator design for the NSNS accumulator ring
Year: 1997
Type: article
Abstract: Collimators are used to remove halo or off-momentum particles from the main proton beam. Off-momentum particles are removed by situating collimators in high dispersion areas of the beam. In addition to removing halo particles collimators will also act as shielding for the remainder of the accelerator structures. Thus, collimators reduce uncontrolled losses around the ring and reduce activation of the accelerator components. Requirements and performance goals for the collimator are summarized. In order to meet these goals a self-shielding collimator configuration will be designed. An arrangement consisting of a layered structure will be considered. The initial layers (in the direction of the proton beam) are transparent to protons, and become progressively less transparent (blacker) with depth into the collimator. In addition, a high density (iron) shield will be added around this structure, particularly in the backward direction, to attenuate any reflected protons. The protons are stopped in the approximate center of the collimator, and thus the bulk of the secondary particles will also be generated there. Since these secondary particles are primarily produced isotropically their leakage path length will be maximized in this manner (high probability of capture or attenuation). In the case of neutrons a black layer is included at each end in order to further minimize their leakage in the direction of the beam. This design will therefore minimize the activation of surrounding accelerator components.
Authors: Ludewig, H., Schmidt, E., Aronson, A., Walker, J., Todosow, M., Mughabghab, S.
Institution: Brookhaven National Laboratory
Language: English
Subfield: Nuclear and High Energy Physics
Field: Physics and Astronomy
Domain: Physical Sciences
Open Access status: green
Funder: U.S. Department of Energy
OpenAlex ID: W167695709
