Austenite-Ferrite Transformation in Hot Rolled Mn-Cr-Mo Dual Phase Steels
Year: 2007
Type: article
Abstract: Interrupted cooling in the run-out table after hot rolling is a processing strategy to produce dual phase ferrite-martensite steel strips. The effects of interrupted cooling temperature and time after austenitizing at 1150 °C are investigated. This is done to establish the conditions for austenite to transform into ferrite-martensite microstructures in a Mn-Cr-Mo strip produced from a CSP (Continuous Strip Processing)-type thin slab. The results show that dual phase microstructures can only be obtained when interrupted cooling is performed at 725<T<800 °C. The amount of martensite and the strength level that can be developed increase as the interrupted cooling temperature increases. Formation of pearlite during the isothermal holding causes a rapid decrease in the level of strength that can be developed in this type of structural material.
Source: Materials science forum
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: hybrid
OpenAlex ID: W1982954018
