Influence of Al2O3 particles on the microstructure and mechanical properties of copper surface composites fabricated by friction stir processing
Year: 2014
Type: article
Abstract: The influence of three factors, such as volume percentage of reinforcement particles (i.e. Al2O3), tool tilt angle and concave angle of shoulder, on the mechanical properties of Cu–Al2O3 surface composites fabricated via friction stir processing was studied. Taguchi method was used to optimize these factors for maximizing the mechanical properties of surface composites. The fabricated surface composites were examined by optical microscope for dispersion of reinforcement particles. It was found that Al2O3 particles are uniformly dispersed in the stir zone. The tensile properties of the surface composites increased with the increase in the volume percentage of the Al2O3 reinforcement particles. This is due to the addition of the reinforcement particles which increases the temperature of recrystallization by pinning the grain boundaries of the copper matrix and blocking the movement of the dislocations. The observed mechanical properties are correlated with microstructure and fracture features.
Source: Defence Technology
Authors: L. Suvarna Raju, A. Kumar
Institutions: Karunya University, National Institute of Technology Warangal
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: diamond
OpenAlex ID: W1995199724