Effects of the WC Grain Size on the Surface Roughness of WC-10%Co Cemented Carbide Micro-Die Machined by FIB
Year: 2002
Type: article
Abstract: Micro-dies with five steps were fabricated by machining with the focused ion beam (FIB) process using two types of WC–10%Co cemented carbide with a WC grain size of 5 \\micron and 0.5 \\micron. The surface roughness of the dies was investigated by atomic force microscopy (AFM). In the coarse-grained cemented carbide, the surfaces of the WC phase were very smooth. However, those of the Co phase were rough, particularly near the interface. In the fine-grained cemented carbide, the surfaces were smoother on the whole and the irregularities of roughness were smaller compared with the coarse-grained cemented carbide, but some voids of about 0.5 \\micron, almost the same size as the WC grain, were observed.
Source: MATERIALS TRANSACTIONS
Authors: Hiroyuki Hosokawa, Koji Shimojima, Mamoru Mabuchi, Masaru Kawakami, Shoken Sano, Osamu Terada
Language: English
Subfield: Ceramics and Composites
Field: Materials Science
Domain: Physical Sciences
Open Access status: bronze
OpenAlex ID: W2004226541