Year: 2007
Type: article
Abstract: The mechanical response of E-862 and PR-520 resins is investigated in tensile and shear loadings. At both types of loading the resins are tested at strain rates of about 5×10−5, 2, and 450–700s−1. In addition, dynamic shear modulus tests are carried out at various frequencies and temperatures, and tensile stress relaxation tests are conducted at room temperature. The results show that the toughened PR-520 resin can carry higher stresses than the untoughened E-862 resin. Strain rate has a significant effect on the response of both resins. In shear, both resins show a ductile response with maximum stress that is increasing with strain rate. In tension, a ductile response is observed at low strain rate (∼5×10−5s−1), and brittle response is observed at the medium and high strain rates (2 and 700s−1). The hydrostatic component of the stress in the tensile tests causes premature failure in the E-862 resin. Localized deformation develops in the PR-520 resin when loaded in shear. An internal state variable constitutive model is proposed for modeling the response of the resins. The model includes a state variable that accounts for the effect of the hydrostatic component of the stress on the deformation.
Source: Journal of Aerospace Engineering
Institutions: Glenn Research Center, The Ohio State University
Language: English
Topic: Epoxy Resin Curing Processes
Subfield: Polymers and Plastics
Field: Materials Science
Domain: Physical Sciences
Open Access status: bronze
OpenAlex ID: W2005255772
