Work

Multilayered Al/CuO thermite formation by reactive magnetron sputtering: Nano versus micro

Year: 2010
Type: article
Abstract: Multilayered Al/CuO thermite was deposited by a dc reactive magnetron sputtering method. Pure Al and Cu targets were used in argon–oxygen gas mixture plasma and with an oxygen partial pressure of 0.13 Pa. The process was designed to produce low stress (<50 MPa) multilayered nanoenergetic material, each layer being in the range of tens nanometer to one micron. The reaction temperature and heat of reaction were measured using differential scanning calorimetry and thermal analysis to compare nanostructured layered materials to microstructured materials. For the nanostructured multilayers, all the energy is released before the Al melting point. In the case of the microstructured samples at least 2/3 of the energy is released at higher temperatures, between 1036 and 1356 K.
Language: English
Open Access status: green
OpenAlex ID: W2006115403
FWCI: 2.659
Cites: 16
Cited by: 201
Related to: 10