Additive effect on bulk phase structure and properties of processed PVC
Year: 1993
Type: article
Abstract: Extrusion grade, K-68, PVC was stabilized with either a combination of diabasic lead stearate and stearic acid or a thiotin compound with a barium/cadmium system. One batch of the stabilized formulation was plasticized with di-n-butyl phthalate while a second batch was used unplasticized. Each of the resulting four sets of formulations was filled with either carbon black or calcium carbonate coated with stearic acid. Small portions of the dry blend were pressed into thin sheets. Uniaxial tensile fracture stress and strain of the thin sheet peaked at very low filler weight fractions (0.05–0.10 parts per hundred resin (phr) in some cases. In all cases, however, values of fracture stress and strain were consistently minimum in the filler concentration region of 1·0–4·0 phr. It is suggested, with the aid of equilibrium acetone mass uptake, that the filler is able to affect the mechanical property by causing an increase in microvoids and crystallinity of the bulk material. A mechanism is proposed to account for the action of a finely divided additive which is immiscible with PVC.
Source: Polymer Testing
Authors: O.P. Obande, B.K. Mailabari, Y.H. Benji
Institutions: Ahmadu Bello University, Abubakar Tafawa Balewa University
Language: English
Topic: Polymer Science and PVC
Subfield: Polymers and Plastics
Field: Materials Science
Domain: Physical Sciences
Open Access status: hybrid
Estimated APC paid: $3,370
OpenAlex ID: W2007248807
