Year: 1999
Type: article
Abstract: The reaction mechanism of lithium insertion into was studied using various analytic techniques including electrochemical measurements, X‐ray diffraction (XRD), and Auger electron spectroscopy (AES). Electrochemical tests demonstrated that 1 mol reacted with 3.9 mol Li from which the initial capacity obtained was approximately 1370 mAh/g. Ex situ XRD and AES data showed that lithium intercalated into the lattice first followed by alloying with Si and Mg. The degradation mechanism of during cycling was investigated because the materials degraded rapidly within ten cycles. The electrode material disintegrated and Li remained within the active material after ten cycles. The XRD and scanning electron microscope data suggested that the degradation mechanism of was due to the volume change during the alloying/dealloying reaction, and the volume expansion/contraction made the electrode materials electrically isolated. © 1999 The Electrochemical Society. All rights reserved.
DOI: 10.1149/1.1392650
Authors: Hansu Kim, Junghee Choi, Hun‐Joon Sohn, Tak Kang
Institution: Seoul National University
Language: English
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: bronze
OpenAlex ID: W2007348307
